Tadiran Telecom T48G/S User Manual page 40

You can enter the number using the keypad displayed on the touch screen.
3. Press
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither.
Note
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone,
press the OK key when the phone is idle. The maximum SIP URI or IP address length is 32
characters. For example, SIP URI: 3606@sip.com, IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press
Enter the desired number using the keypad or the on-screen keypad.
Press
- With the handset on-hook, enter the desired number using the keypad.
Press
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the on-screen keypad.
Press
- With the optional headset connected, press
, , or tap the Send soft key.
, or tap the Send soft key.
, , or tap the Send soft key.
, , or tap the Send soft key.
or tap the line key to obtain a dial tone.
to activate the headset mode.
to activate the headset mode.
Basic Call Features
34