Troubleshooting - Home Decorators Collection Chartwell Owner's Manual

Troubleshooting (continued)
PROBLEM SOLUTION
The fan wobbles. 1.
14
Verify that all blades and blade bracket screws are secure (most fan
wobble problems are caused by loose parts). Once the fan is properly
installed, run the ceiling fan for 10 minutes to let the fan self-adjust. If
wobble occurs after running the fan for 10 minutes, verify blade level
using the following process:
- Select a point on the ceiling above the tip of one of the blades, then
select any fan blade and measure from the center of the selected blade to
the point on the ceiling. Rotate the fan until the next blade is positioned
and repeat the measurement using the same point from the ceiling for
every blade.Measurement deviations should be within 1/8 in.
- If all deviations are less than 1/8 in. and the fan continues to wobble,
please call Customer Service (800-986-3460) to order a complimentary
Blade Balancing Kit.
- If deviation is greater than 1/8 in., please call Customer Service
(800-986-3460) to order complimentary replacements of your brackets.