Safety Rules - Home Decorators Collection Chartwell Owner's Manual

Safety Rules - Read and Save These Instructions
1. To reduce the risk of electric shock, insure electricity has been turned
off at the circuit breaker or fuse box before beginning.
All wiring must be in accordance with the National Electrical Code
2.
"ANSI/NFPA 70" and local electrical codes. Electrical installation should
be performed by a qualified licensed electrician.
3. The outlet box and support structure must be securely mounted and
capable of reliably supporting a minimum of 35 lbs (15.9 kg) or less.
Use only UL-listed outlet boxes marked "FOR FAN SUPPORT".
4. The fan must be mounted with a minimum of 7.55 ft (2.3m) clearance
from the trailing edge of the blades to the floor.
Avoid placing objects in the path of the blades.
5.
6. To avoid personal injury or damage to the fan and other items, be cautious
when working around or cleaning the fan.
Do not use water or detergents when cleaning the fan or fan blades. A dry
7.
dust cloth or lightly dampened cloth will be suitable for most cleaning.
After making electrical connections, spliced conductors should be turned
8.
upward and pushed carefully up into outlet box. The wires should be spread
apart with the grounded conductor and the equipment-grounding conductor
on one side of the outlet box and ungrounded conductor on the other side of
the outlet box.
9. All set screws must be checked and retightened where necessary before
installation.
10. The appliance is not to be used by persons (including children) with reduced
physical, sensory or metal capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction. Children should be
supervised to ensure that they do not play with the appliance.
11. Instructions for the use of the apparatus according with NOM-024-SCFI, are
provided with the apparatus.
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS FAN MUST BE INSTALLED
WITH AN ISOLATING WALL CONTROL / SWITCH.
WARNING
TO REDUCE THE RISK OF PERSONALL INJURY, DO NOT BEND THE BLADE
ARMS (ALSO REFERRED TO AS FLANGES), WHEN INSTALLING THE
BRACKETS, BALANCING THE BLADES OR CLEANING THE FAN. DO NOT
INSERT FOREIGN OBJECTS IN – BETWEEN ROTATING FAN BLADES.
CAUTION
TO REDUCE THE RISK OF PERSONAL INJURY, USE ONLY THE SCREWS
PROVIDED WITH THE OUTLET BOX.
NOTE
CHANGE OR MAINTAIN LED LIGHT KIT SHALL BE PERFORMED BY THE
MANUFACTURER, ITS SERVICE AGENT OR DULY QUALIFIED PERSONS.
1