Storing Projector Settings (Automatic Save Feature) - NEC XL-3500 User Manual

Storing Projector Settings (Automatic Save Feature)

You have two options to store projector settings in the memory: auto-
matically and manually.
* The Automatic Save Feature mode has been set to "DISABLE" by
factory. For information on setting, see "Automatic Auto Data Store"
on page 64.
When the Automatic Save Feature mode is set to "ENABLE", pro-
jector settings will be stored in the projector' s memory automati-
cally.
Settings are stored automatically when any one of the following
procedures is performed:
• One input is switched to another.
• The projector is turned off.
• After every 10 minutes of elapsed time.
When the Automatic Save Feature mode is set to "DISABLE", pro-
jector settings can be stored in the projector' s memory manually.
When you try to return the source screen by pressing END several
times, the "STORE?" menu is displayed.
To manually save settings, proceed as follows:
1. Use the END button to display the "STORE" menu from the cur-
rent adjustment screen or menu.
2. Use the CURSOR or
press ENTER.
Items to select
• Yes ---- Overwrites the currently projected signal and saves
the settings. Note that "Yes" is available only for
registered signals.
• No ----- Does not save settings.
button to highlight "Yes" or "No" and
29
3.OPERATION
S t o r e ?
Y e s N o