Adjustment Matrix - NEC NP-NC900C-A Service Manual

Adjust matrix
Service parts
ITEM DESCRIPTION P/N PARTS PHOTO
SENSOR (H)
1 79TM1392
PWB ASSY
SENSOR (V)
2 79TM1402
PWB ASSY
FORMATTER-B
3 79TY1241
PWB ASSY(NC)
FORMATTER-R
4 79TY1231
PWB ASSY(NC)

ADJUSTMENT MATRIX

Adjustments after parts
Pages of the service manual where
replacement
the items and contents of the required
Adjustments needed: Yes
adjustments are described.
No adjustments needed: No
Please kindly check Service Manual
Yes P10-1
Motor Board Setting and Adjust
Please kindly check Service Manual
Yes P10-1
Motor Board Setting and Adjust
No Non
No Non
"Confidential, Do Not Duplicate without written authorization from NEC."
Jigs and software required for adjustments.
A
(1). Motor Board Jig as photo (A)
(2). 12V / 1 A_AC Adapter Jig as photo (B)
A
(1). Motor Board Jig as photo (A)
(2). 12V / 1 A_AC Adapter Jig as photo (B)
A
(1). 5mm Cross Torque Screwdriver Jig
(2). Loose 2 screws for Heat-Sink
5 kg-f -cm as photo (A)
(3). Loose 2 screws for Heat-Sink bracket
5 ~ 6 kg-f-cm as photo (B)
(4). Loose Screw 4 screws for DMD bracket
5 ~ 6 kg-f-cm as photo (C)
All Jigs and Torque are the same with B formatter board. Please kindly refer to B formatter board to disassembly and assembly.
8-1
B
B B B
Torque: 5-6kgf.cm
B
C C
Torque:5-6kgf.cm
Torque:5-6kgf.cm