Lenovo ThinkSystem DW612S Neptune DWC Instructions Manual page 66

The indicated auxiliary compute node does not acquired power permission since the indicated primary
compute node is not power on.
Severity: Warning
Alert Category: Node - Node event
SNMP Trap ID: 554107248
User Action:
1. Ensure the primary node is power on.
2. If the event persists, reset the BMC on indicated auxiliary compute node.
3. If the event persists, ensure the indicated primary compute node is power off, and then reseat it.
(Service technician only)
4. If the event persists, ensure the indicated primary compute node is power off, and then replace the
indicated auxiliary compute node. (Service technician only)
5. If the event persists, please consult with technical service.
• 21070171: Aux3/Prim4 SIO: Slot Or Connector, transition to Non-Critical from OK was asserted.
The indicated auxiliary compute node does not acquired power permission since the indicated primary
compute node is not power on.
Severity: Warning
Alert Category: Node - Node event
SNMP Trap ID: 554107249
User Action:
1. Ensure the primary node is power on.
2. If the event persists, reset the BMC on indicated auxiliary compute node.
3. If the event persists, ensure the indicated primary compute node is power off, and then reseat it.
(Service technician only)
4. If the event persists, ensure the indicated primary compute node is power off, and then replace the
indicated auxiliary compute node. (Service technician only)
5. If the event persists, please consult with technical service.
• 21070172: Aux5/Prim6 SIO: Slot Or Connector, transition to Non-Critical from OK was asserted.
The indicated auxiliary compute node does not acquired power permission since the indicated primary
compute node is not power on.
Severity: Warning
Alert Category: Node - Node event
SNMP Trap ID: 554107250
User Action:
1. Ensure the primary node is power on.
2. If the event persists, reset the BMC on indicated auxiliary compute node.
3. If the event persists, ensure the indicated primary compute node is power off, and then reseat it.
(Service technician only)
4. If the event persists, ensure the indicated primary compute node is power off, and then replace the
indicated auxiliary compute node. (Service technician only)
5. If the event persists, please consult with technical service.
• 21070173: Aux7/Prim8 SIO: Slot Or Connector, transition to Non-Critical from OK was asserted.
The indicated auxiliary compute node does not acquired power permission since the indicated primary
compute node is not power on.
62
ThinkSystem DW612S Neptune DWC Enclosure SMM 2 Messages and Codes Reference