Download Print this page

Lenovo ThinkSystem DW612S Neptune DWC Instructions Manual page 38

Smm 2 messages and codes reference
Hide thumbs Also See for ThinkSystem DW612S Neptune DWC:

Advertisement

The indicated power supply reports the internal sensing device reaches warning temperature and persists
over 30 seconds.
Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141492682
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
– If Fault Indicator (!) is lit on, replace indicated power supply.
2. If the event persists, please consult with technical service.
• 086F01CB: PSU 4 Over Temp: Power Supply, Power Supply Failure detected was asserted.
The indicated power supply reports the internal sensing device reaches warning temperature and persists
over 30 seconds.
Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141492683
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
– If Fault Indicator (!) is lit on, replace indicated power supply.
2. If the event persists, please consult with technical service.
• 086F01CC: PSU 5 Over Temp: Power Supply, Power Supply Failure detected was asserted.
The indicated power supply reports the internal sensing device reaches warning temperature and persists
over 30 seconds.
Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141492684
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
– If Fault Indicator (!) is lit on, replace indicated power supply.
2. If the event persists, please consult with technical service.
• 086F01CD: PSU 6 Over Temp: Power Supply, Power Supply Failure detected was asserted.
The indicated power supply reports the internal sensing device reaches warning temperature and persists
over 30 seconds.
Severity: Error
Alert Category: PSU - Power Supply event
SNMP Trap ID: 141492685
User Action:
34
ThinkSystem DW612S Neptune DWC Enclosure SMM 2 Messages and Codes Reference

Advertisement

loading