Lenovo ThinkSystem DW612S Neptune DWC Instructions Manual page 21

Alert Category: PSU - Power Supply event
SNMP Trap ID: 134678422
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
– If Fault Indicator (!) is lit on, replace indicated power supply.
2. If the event persists, please consult with technical service.
• 08070797: PSU 6 EPOW: Power Supply, Monitor was asserted.
The indicated power supply reports an early power off warning owing to its input power reaches
undervoltage or overvoltage lockout limit.
Severity: Information
Alert Category: PSU - Power Supply event
SNMP Trap ID: 134678423
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
– If Fault Indicator (!) is lit on, replace indicated power supply.
2. If the event persists, please consult with technical service.
• 08070798: PSU 7 EPOW: Power Supply, Monitor was asserted.
The indicated power supply reports an early power off warning owing to its input power reaches
undervoltage or overvoltage lockout limit.
Severity: Information
Alert Category: PSU - Power Supply event
SNMP Trap ID: 134678424
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
– If Fault Indicator (!) is lit on, replace indicated power supply.
2. If the event persists, please consult with technical service.
• 08070799: PSU 8 EPOW: Power Supply, Monitor was asserted.
The indicated power supply reports an early power off warning owing to its input power reaches
undervoltage or overvoltage lockout limit.
Severity: Information
Alert Category: PSU - Power Supply event
SNMP Trap ID: 134678425
User Action:
1. Check LED status of indicated power supply as
– If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated
power supply.
– If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
. 17
Chapter 2 SMM2 events