OPTEX FA Fastus CD2H Series User Manual page 7

NOTICE
„
• After carefully considering the intended use, required specifications, and usage conditions, install and use
the product within the specified ranges.
• All specifications may be changed without notice.
• When using this product, it is the responsibility of the customer to ensure necessary safety designs in
hardware, software, and systems in order to prevent any threat to life, physical health, and property due to
product malfunction or failure.
• Do not use this product for the development of weapons of mass destruction, for military use, or for any
other military application. Moreover, if this product is to be exported, comply with all applicable export laws
and regulations, including the "Foreign Exchange and Foreign Trade Act" and the "Export Administration
Regulations," and carry out the necessary procedures pursuant to the provisions therein.
• Before using this product, fully examine the applicable environmental laws and regulations, and operate
the product in conformity to such laws and regulations. OPTEX FA does not assume any responsibility for
damages or losses occurring as a result of noncompliance with applicable laws and regulations.
• If this product will be exported to the United States, approval must first be obtained from the FDA (Food
and Drug Administration), the laser regulating body of the United States.
• A report for this product has been submitted to the CDRH (Center for Devices and Radiological Health).
• If installing this product in your own equipment, ensure that the product is properly handled according to
the laws and regulations of the relevant country or region.
Safety Precautions
v