Motherboard Features - Supermicro X10DSN-TS User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
I/O Devices
Dual Intel E5-2600v3/v4 series processors (Socket
®
R3-LGA 2011) w/dual full-width Intel QuickPath Inter-
connect (QPI) links (9.6 GT/s max. one direction per
QPI) support
Notes: 1. E5-2600v4 requires Revision 2.0
BIOS (or higher). 2. E5-2600v3 is fully back-
compatible with all BIOS revisions.
•
Integrated memory controller supports up to 1 TB
of Load Reduced (LRDIMM), Registered (RDIMM)
or Non-volatile (NV-DIMM) DDR4 (288-pin) ECC
2400/2133/1866/1600/1333 modules in 16 slots
Note 1: Memory speed support depends on
the processors used in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM Sizes
•
DIMM Up to 64GB at 1.2V
•
Intel® PCH C612
•
One (1) PCI-Express 3.0 x16 + One (1) PCI-Express
3.0 x8 slots supported by CPU2 (JSLOT1 + SXB1)
•
Graphics controller via ASpeed AST2400 BMC
•
ASpeed AST2400 Baseboard Controller (BMC) sup-
ports IPMI 2.0
SATA/SAS Connections
•
SATA 3.0
•
RAID (PCH)
IPMI 2.0
•
IPMI 2.0 supported by ASpeed AST2400
Serial (COM) Port
•
One (1) Fast UART 16550 port support via a RSC
card
1-7
Chapter 1: Overview
Two (2) SATA 3.0 connectors
that support Super DOMs (with
power pins built-in) (S-SATA
0/1)
RAID 0, 1, 5, 10