Supermicro X10DSN-TS User Manual page 66

Chapter 4: AMI BIOS
Energy Performance Bias Setting (Available when Power Technology is
set to Custom or Energy Efficient)
Use this feature to select an appropriate power setting and performance level
for the system. Select Performance to maximize system performance by using
maximum amount of power. Select Balanced Performance to downgrade system
performance a notch by using less power. Select Power to maximize power
saving, which may greatly compromise system performance as a result. Select
Balanced Power to downgrade power saving a notch and allow the system to
use more power to boost system performance. The options are Performance,
Balanced Performance, Balanced Power, and Power.
Energy Efficiency Turbo (Available when Power Technology is set to
Custom or Energy Efficient)
Select Enable for the system to operate at turbo mode with reduced power con-
sumption so that your machine can achieve maximum system performance with
the maximum power efficiency possible. The options are Enable and Disable.
*If the option is set to Custom, the following items will display:
 CPU P State Control (Available when Power Technology
is set to Custom)
EIST (P-states)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency to reduce power consumption and
heat dissipation. The options are Disable and Enable.
Turbo Mode
Select Enable to use the Turbo Mode to boost system performance. The options
are Enable and Disable.
P-state Coordination
This item is used to change the P-state (Power-Performance State) coordination
type. P-state is also known as "SpeedStep" for Intel processors. Select HW_ALL
to change the P-state coordination type for hardware components only. Select
SW_ALL to change the P-state coordination type for all software installed in the
system. Select SW_ANY to change the P-state coordination type for a software
program in the system. The options are HW_All, SW_ALL, and SW_ANY.
4-9