Supermicro X10DSN-TS User Manual page 80

Chapter 4: AMI BIOS
PCI/PCIX/PCI-E Slot1 OPROM/PCI/PCIX/PCI-E Slot2 OPROM/PCI/PCIX/PCI-E
Slot3 OPROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled, Legacy,
and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specified by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port1 or LAN Port2
for system boot. The default setting for LAN1 Option ROM is PXE, for LAN2 Op-
tion ROM is Disabled.
Onboard NVMe1 Option ROM/Onboard NVMe2 Option ROM
Use this option to select the type of device installed in NVMe Port1 or NVMe Port2
for system boot. The options are Disabled and EFI.
Onboard Video Option ROM
Use this option to select the type of device installed in the video port for system
boot. The options are Disabled, Legacy, and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are Onboard and Offboard.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
fied Extensible Firmware Interface) for network stack support. The options are
Disabled and Enabled.
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and Disabled.
4-23