Event Logs - Supermicro X10DSN-TS User Manual

Chapter 4: AMI BIOS
4-4

Event Logs

This submenu allows the user to configure Event Log settings.
Change SMBIOS Event Log Settings

This feature allows the user to configure SMBIOS Event settings.
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable SMBIOS (System Management BIOS) Event Logging
during system boot. The options are Enabled and Disabled.
Runtime Error Logging Support
Select Enable to support Runtime Error logging. The options are Enabled and
Disabled. If this item is set to Enabled, the following item will be available for
configuration:
Erasing Settings
Erase Event Log
Select Yes to erase all error events in the SMBIOS (System Management BIOS)
log before an event logging is initialized at bootup. The options are No, Yes, Next
reset, and Yes, every reset.
When Log is Full
Select Erase Immediately to immediately erase all errors in the SMBIOS event log
when the event log is full. Select Do Nothing for the system to do nothing when
the SMBIOS event log is full. The options are Do Nothing and Erase Immediately.
4-33