Table of Contents
Advertisement
Jumper
JBT1
Clear CMOS/Reset BIOS Configuration
JPB1
BMC Enable
JPG1
VGA Enable
JPL1
LAN1/LAN2 Enable
JPME2
Manufacture (ME) Mode Select
Connectors
Battery (JBAT1)
FAN1/FAN2
JSD1/JSD2
JSIOM
JSLOT1+SXB
JTPM1
LAN1/LAN2
S-SATA 0/1
(BP) USB 0/1 (3.0)
USB 2 (3.0)
VGA (JVGA1)
LED
LEDH (Top LED)
LEDL (Bottom LED)
X10DSN-TS Jumpers
Description
X10DSN-TS Connectors
Onboard CMOS battery (See Chpt. 3 for Used Battery Disposal)
CPU/system fan headers (Fan 1/Fan 2)
SATA DOM (Device on Module) power connectors 1/2
SMCI-proprietary I/O module for add-on card use
CPU2 PCI-E 3.0 x16 + CPU2 PCI-E 3.0 x8 slot
TPM (Trusted Platform Module)/Port 80 header
10_Gigabit (T) Ethernet LAN ports 1/2 on the I/O back panel
S-SATA 3.0 connections (0/1) supported by Intel PCH w/support of SMCI
SuperDOM w/power pins built-in)
Backpanel USB 3.0 ports 0/1
Type A USB 3.0 connection header for front access (USB 2)
VGA connection header
X10DSN-TS Onboard LED Indicators
Description
BMC Heartbeat LED
System Heartbeat LED
1-5
Chapter 1: Overview
Default Setting
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Description
State
Green: Blinking
Green: Blinking
Status
BMC Normal
System Normal
Advertisement
Table of Contents
