D Changing Setup Options - Stryker LIFEPAK 1000 Operating Instructions Manual

CHANGING SETUP OPTIONS
Setup options allow you to define operating features for your defibrillator, such as CPR intervals.
Setup options are listed in tables beginning with
To enter Setup mode:
1 Ensure that no electrodes or cables are connected to the defibrillator.
2 Press and hold both softkeys and press the ON/OFF button. The Enter Setup Mode screen
appears.
Setup
Enter Setup Mode passcode
Press
Increase
Enter Setup Mode
Figure D-1
3 Enter the Setup mode passcode. The factory default passcode is 0000—press the MENU
button four times to accept the default passcode. For information on how to change the
passcode, see page D-6.
To exit Setup mode, turn the defibrillator off. If you changed the setup options, the
Note:
changes are saved and will appear the next time you turn the defibrillator on. (Refer to Setup
menu options that follow.)
LIFEPAK 1000 Defibrillator Operating Instructions
Copyright ©2021 Stryker
Table D-1.
button to set
Decrease
Changing Setup Options
D-1