Summary of Contents for Stryker Trauma Stretcher 1002
Page 1
IMPORTANT File in your maintenance records Trauma Stretcher Model 1002 MAINTENANCE MANUAL For Parts or Technical Assistance 1−800−327−0770 (Option 2)
Fowler Angle +18_ to −18 ° Trendelenburg / Reverse Trendelenburg Stryker reserves the right to change specifications without notice. WARNING / CAUTION / NOTE DEFINITION The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed. WARNING Alerts the reader about a situation, which if not avoided, could result in death or serious injury.
Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.
If these types of products are used to clean Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor- rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.
Service Information CASTER COVER INSTALLATION AND REMOVAL Double Prongs Looking through the larger of the two side cut−outs, align the cover with the axle nut or bolt head, as shown. Single Prong Push down on the opposite side of the cover until the single prong engages the caster horn.
Service Information RELEASE PEDAL ADJUSTMENT 1. Manually disengage the release pedal swivel (item J on page 33) from the release pedal assembly. 2. To increase the release rod engagement with the release valve, turn the release pedal swivel clockwise on the threaded release rod. 3.
Service Information SIDE CONTROL BRAKE ROD REMOVAL Required Tools: Hammer 7/32” Punch Needle Nose Pliers String or Bungee Cords Fifth Wheel Base 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.
Service Information FOOT END RELEASE PEDAL REPLACEMENT Required Tools: Needle Nose Pliers 1. Apply the stretcher brakes. 2. Disconnect the release pedal return springs from the foot end release pedals. 3. Remove the rue ring cotters and the clevis pins connecting the foot end release pedals to the mounting bracket.
Service Information BRAKE RING REMOVAL Required Tools: 9/16” Socket w/Extension 3/8” Drive Ratchet Needle−Nose Pliers String or Bungee Cord 1. Pump the litter up to full height. 2. Lift the base hood and support it from the litter using string or bungee cords. 3.
Service Information BIG WHEEL REMOVAL Required Tools: Large Standard Screwdriver Small Standard Screwdriver String or Bungee Cords 1. Lift the base hood and separate the Velcro holding it to the base frame. Support the hood from the litter using bungee cords so it is out of the way. 2.
Service Information BIG WHEEL CARRIAGE ASSEMBLY REMOVAL Required Tools: 1/2” Socket 3/8” Drive Ratchet Needle−Nose Pliers 1. Remove the litter top from the stretcher (see page 17). 2. Lift the base hood off the base frame. 3. With the brake/steer pedal in the steer position, remove the clevis pin and rue ring cotter connecting the brake rod to the brake rod drive link at each end of the stretcher.
Service Information BIG WHEEL CAM GAS SPRING DAMPENER REMOVAL Required Tools: 1/2” Socket 3/8” Drive Ratchet Needle−Nose Pliers 1. Remove the litter top from the stretcher (see page 17). 2. Lift the base hood off the base frame. 3. Remove the two clevis pins and rue ring cotters connecting the brake rods to the drive arm at the center of the base near the cam bracket assembly.
Service Information HEAD END HYDRAULIC JACK REMOVAL Required Tools: 1/2” Socket w/Extension 3/8” Drive Ratchet 1. Remove the litter top from the stretcher (see page 17). 2. Using a 1/2” socket with extension and a 3/8” drive ratchet, remove the two hex head screws holding the jack base to the stretcher base frame.
Service Information FOOT END HYDRAULIC JACK REMOVAL (BIG WHEEL BASE WITH 3−SIDED CONTROLS) Required Tools: 1/2” Socket 3/8” Drive Ratchet Pliers 1. Remove the litter top from the stretcher (see page 17). 2. Lift the base hood off the base frame. 3.
Service Information PNEUMATIC FOWLER ADJUSTMENT Required Tools: 5/32” Hex Allen Wrench 1/2” Open End Wrench Adjustment Procedure: 1. Refer to drawing 1002−31−120 (page 68) for parts reference. 2. For easier access, move Fowler to 75_ or higher. 3. Using a 1/2” open end wrench, loosen the nuts (item K) in the actuator arms on the end of the trip bar (C). 4.
Page 22
0753−006−130 Fifth Wheel Assembly Item Part No. Part Name Qty. 0003−083−000 Hex Hd. Cap Screw 0016−035−000 Nylock Hex Nut 0023−288−000 Hex Washer Hd. Screw 0025−050−000 Rivet 0753−006−074 Torsion Spring 0753−006−075 Torsion Spring 0753−006−097 Drive Shaft Bearing 0753−006−106 Dampener 0753−006−108 Thrust Washer 0753−006−115 Bearing 0753−006−120...
Page 23
Base Assembly w/Standard Brakes (Fifth Wheel Base) Assembly part number 0753−003−105 (reference only)
Page 24
Base Assembly w/Standard Brakes (Fifth Wheel Base) Item Part No. Part Name Qty. 0005−039−000 Step Bolt 0011−262−000 Washer 0016−035−000 Nylock Hex Nut 0016−049−000 Nylock Hex Nut 0023−025−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0027−012−000 Hitch Pin 0027−022−000 Rue Ring Cotter 0028−037−000 External Retaining Ring...
Page 25
Brake Rod Assembly Assembly part number 0753−003−001 (reference only) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0753−003−004 Brake Rod Support (page Drive Link Assembly 0753−003−014 Brake Rod 0753−003−015 Nyliner 0753−003−099 Butterfly “V” Pedal (page Drive Link Assembly 1210−201−335 Red Brake Label 1210−201−336...
Page 26
0753−003−010 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−011 Brake Rod Drive Link 0753−003−061 Brake Cam Drive Link 0753−003−098 Flat Hd. Semi−Tubular Rivet 0753−003−102 Brake Cam...
Page 27
0753−006−135 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−011 Brake Rod Drive Link 0753−003−098 Semi−Tubular Rivet 0753−006−122 5th Wheel Cam Drive Link 0753−006−147 Fifth Wheel Drive Link...
Page 28
0753−010−020 8” Caster Assembly Item Part No. Part Name Qty. 0715−002−025 Wheel 0003−099−000 Hex Hd. Cap Screw 0753−010−021 Caster Horn w/Bearing 0016−060−000 Centerlock Nut...
Page 29
Base Assembly with 4−Sided Brakes Assembly part number 0753−003−120 (reference only)
Page 30
Base Assembly with 4−Sided Brakes HEAD END FOOT END Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0005−044−000 Step Bolt 0753−003−066 Clevis Pin 0011−262−000 Washer 0753−003−079 Brake Pin Guide 0016−035−000 Nylock Hex Nut (page Side Brake Rod Ass’y 0016−049−000 Nylock Hex Nut 0753−003−121...
Page 31
0753−003−210 Side Control Brake Rod Assembly Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0026−340−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0753−003−099 Butterfly “V” Pedal 0753−003−112 Side Control Link 0753−003−117 Rod End Link 0753−003−119 Side Control Brake Rod 0753−003−214 Shaft Support 1210−201−335...
Page 32
Brake Rod Assembly Assembly part number 0753−003−125 (reference only) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 0753−003−004 Brake Rod Support (page Drive Link Assembly 0753−003−014 Brake Rod 0753−003−015 Brake Rod Nyliner 0753−003−099 Butterfly “V” Pedal 0753−003−112 Side Control Link (page Drive Link Assembly 1210−201−335...
Page 33
Base with Dual Side Hydraulics (Fifth Wheel Base) Assembly part number 0753−005−200 (reference only) HEAD END Insert pump ram into keyhole slot on both ends. Lower pump connecting rod weldment onto pump ram as shown Insert spring hook thru slots in pump pedal Attach other end onto jack tower as shown...
Page 34
Base with Dual Side Hydraulics (Fifth Wheel Base) Insert spring hook thru hole in pump connecting rod. Attach other hook to return spring as shown Insert spring hook onto hook on release pedal. Insert other hook onto pump connecting rod as shown.
Page 35
Base with Dual Side Hydraulics (Fifth Wheel Base) See Detail A Insert head end release rod into release valve assembly as shown DETAIL B Insert foot end release rod into release valve assembly as shown DETAIL A See Detail B Item Part No.
Page 36
0753−004−101 Release Pedal Assembly Item Part No. Part Name Qty. 0025−079−000 Rivet 0753−004−004 Release Pedal Weldment 0753−004−029 Release Pedal Standoff 0753−004−320 Release Pedal Support 0753−004−321 Release Pedal Support 1061−201−127 Short Uni−Pedal...
Page 37
0753−005−185 Head End Pump Pedal Assembly Item Part No. Part Name Qty. 0026−343−000 Groove Pin 0715−001−140 Vinyl Tube 0753−005−044 Pump Pedal Bushing 0753−005−180 Head End Pump Pedal Weldment 0753−201−126 Pump Pedal...
Page 38
Base Labeling Assembly Assembly part number 0753−010−062 (reference only) Department Label page 39 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 0753−010−040 Base Hood 1040−010−134 Bellows 0946−201−060 Stryker Logo Label...
Page 39
Base Labeling Assembly, 4−Sided Brakes Assembly part number 0753−010−063 (reference only) Department Label page 39 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 0753−010−040 Base Hood 1040−010−134 Bellows 0946−201−060 Stryker Logo Label 0753−010−018 Brake/Steer Label, Right 0753−010−019 Brake/Steer Label, Left...
Page 40
Base Labeling Assembly Color Item D Brake/ Item E Item F Brake/ Item G Litter Set P/N Steer, Foot End Lift/Lower, Left Steer, Head End Lift/Lower, Right Bumper Strip 0753−010−051 0753−010−055 0753−010−017 0753−010−054 1010−700−015 0753−010−120 PURPLE 0753−010−151 0753−010−155 0753−010−170 0753−010−154 1010−700−025 0753−010−121 GREEN...
Page 42
Big Wheel End Control Base Assembly Assembly part number 1040−015−105 (reference only) HEAD END...
Page 43
Big Wheel End Control Base Assembly DETAIL A HEAD END See Detail A...
Page 44
Big Wheel End Control Base Assembly Item Part No. Part Name Qty. 0021−166−000 Set Screw 0023−150−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0026−273−000 Clevis Pin 0025−330−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0029−007−000 Dual Lock 0029−009−000 Dual Lock 0042−020−000 Collar 0081−330−000...
Page 45
Base Assembly w/Standard Brakes (Big Wheel Base) Assembly part number 1040−003−405 (reference only)
Page 46
Base Assembly w/Standard Brakes (Big Wheel Base) Item Part No. Part Name Qty. 0005−039−000 Step Bolt 0011−262−000 Washer 0016−035−000 Nylock Hex Nut 0016−049−000 Nylock Hex Nut 0023−025−000 Hex Washer Hd. Screw 0027−012−000 Hitch Pin 0027−022−000 Rue Ring Cotter Pin 0028−037−000 External Retaining Ring 0038−439−000 Extension Spring...
Page 47
1040−003−185 Drive Link Assembly Item Part No. Part Name Qty. 0753−003−098 Semi−Tubular Rivet 0753−003−102 Brake Cam 1040−003−174 Brake Rod Drive Link 1040−003−076 Cam Drive Link...
Page 48
1040−003−191 Brake Rod Assembly (Big Wheel Base) Item Part No. Part Name Qty. 0026−067−000 Slotted Spring Pin 1040−003−113 Brake Rod 0753−003−099 Butterfly “V” Pedal...
Page 49
Base with Dual Side Hydraulics (Big Wheel Base) Assembly part number 1040−005−400 (reference only) Insert pump ram into keyhole slot on both ends. Lower pump connecting rod weldment onto pump ram as shown. Insert item P to retain pump connecting rod. 0753−002−025 Constant Descent Jacks 0753−002−080 Variable Descent Jacks...
Page 50
Base with Dual Side Hydraulics (Big Wheel Base) Insert spring hook thru hole in pump connecting rod weldment Attach other hook to return spring hook as shown. Insert spring hook into hook on release pedal assembly. Insert other hook into pump connecting rod weldment as shown.
Page 51
Base with Dual Side Hydraulics (Big Wheel Base) Insert head end release rod into release valve assembly as shown DETAIL A SEE DETAIL B Insert foot end release rod into release valve assembly as shown DETAIL B SEE DETAIL A Item Part No.
Page 53
Cam Bracket Assembly Assembly part number 1040−006−201 (reference only)
Page 54
Cam Bracket Assembly Item Part No. Part Name Qty. 0014−004−000 Washer 0014−063−000 Washer 0023−262−000 Clevis Pin 0026−330−000 Clevis Pin 0026−341−000 Clevis Pin 0026−349−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0027−025−000 Rue Ring Cotter 0081−400−000 Needle Bearing 0081−634−000 Needle Bearing 1040−006−209 Dampener 1040−006−141 Cam Pivot...
Page 55
Big Wheel Carriage Assembly Assembly part number 1040−015−101 (reference only) Item Part No. Part Name Qty. 0014−004−000 Washer 0026−341−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0028−330−000 Spiral Retaining Ring 0081−011−000 Needle Bearing 1040−015−006 Carriage Return Spring 1040−015−030 Cover w/Counterweight 1040−015−038 Washer 1040−015−053 Carriage Spring Retainer...
Page 56
Big Wheel 4−Sided Control Base Assembly part number 1040−025−105 (reference only) HEAD END...
Page 57
Big Wheel 4−Sided Control Base DETAIL A HEAD END See Detail A...
Page 58
Big Wheel 4−Sided Control Base Item Part No. Part Name Qty. 0021−166−000 Set Screw 0023−150−000 Hex Washer Hd. Screw 0023−288−000 Hex Washer Hd. Screw 0026−273−000 Clevis Pin 0026−330−000 Clevis Pin 0027−020−000 Rue Ring Cotter 0029−007−000 Dual Lock 0029−009−000 Dual Lock 0042−020−000 Collar 0081−330−000...
Page 59
Side Control Big Wheel Carriage Assembly Assembly part number 1040−025−101 (reference only)
Page 60
Side Control Big Wheel Carriage Assembly Item Part No. Part Name Qty. 0011−148−000 Washer 0011−525−000 Washer 0014−004−000 Washer 0026−341−000 Clevis Pin 0026−342−000 Groove Pin 0027−020−000 Rue Ring Cotter 0028−166−000 External Retaining Ring 0028−330−000 External Retaining Ring 0081−011−000 Needle Bearing 0081−175−000 Thrust Bearing 0753−003−099 Butterfly “V”...
Page 61
1040−025−010 Side Control Big Wheel Linkage Ass’y Item Part No. Part Name Qty. 0753−003−098 Flat Hd. Semi−Tubular Rivet 0753−003−117 Rod End Link 1040−025−011 Main Link 1040−025−013 Toggle Pivot Plate 1040−025−016 Main Link Cover 1040−025−020 Yoke Weldment 1040−025−018 Toggle Pivot Spacer 1040−025−027 Link Spacer...
Page 62
Base Labeling Assembly − Big Wheel Base Assembly part number 1040−015−400 (reference only) Department Label page 62 Specification Label FOOT END HEAD END Item Part No. Part Name Qty. 1040−010−134 Bellows 1040−015−404 Base Hood 0946−201−060 Stryker Logo Label...
Page 63
Base Labeling Assembly Color Item D Brake/ Item E Item F Brake/ Item G Litter Set P/N Steer, Foot End Lift/Lower, Left Steer, Head End Lift/Lower, Right Bumper Strip 0753−010−051 0753−010−055 0753−010−017 0753−010−054 1010−700−015 0753−010−120 PURPLE 0753−010−151 0753−010−155 0753−010−170 0753−010−154 1010−700−025 0753−010−121 GREEN...
Page 64
0753−002−080 Variable Descent Hydraulic Jack Option 0753−001−001 Base Frame Weldment Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw 0753−002−070 Variable Descent Jack Assembly 0753−010−007 Reservoir Clamp...
Page 65
0753−002−025 Constant Descent Hydraulic Jack Option 0753−001−001 Base Frame Weldment Item Part No. Part Name Qty. 0023−288−000 Hex Washer Hd. Screw 0753−002−001 Constant Descent Jack Ass’y 0753−010−007 Reservoir Clamp...
Page 66
Litter Assembly Assembly part number 1002−101−010 (reference only) Detail of Litter Bumper HEAD END Litter Frame 1001−001−120...
Page 68
Litter Assembly HEAD END Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0001−011−000 Self−Tapping Screw 0753−010−036 Support Tube 0001−096−000 Flat Hd. Machine Screw 0926−400−142 Bumper 0002−018−000 Round Hd. Mach. Screw 0938−001−401 Collar 0003−047−000 Hex Hd. Cap Screw 1001−001−036 Hole Plug 0003−221−000...
Page 69
Pneumatic Fowler Assembly Assembly part number 1002−031−120 (reference only) Item Part No. Part Name Qty. 1001−001−036 Hole Plug 1002−031−113 Fowler Tube Assembly 1002−031−118 Trip Bar Assembly 1010−231−012 Fowler Skin (page Outer Housing Ass’y, Right (page Outer Housing Ass’y, Left 0004−161−000 Hex Soc.
Page 70
Pneumatic Fowler Outer Housing Assembly Assembly part number 1210−31−106 (Right) Item Part No. Part Name Qty. 25−144 Semi−Tubular Rivet 1210−31−103 Pivot Tab 1210−31−104 Outer Housing, Right Assembly part number 1210−31−107 (Left) Item Part No. Part Name Qty. 25−144 Semi−Tubular Rivet 1210−31−103 Pivot Tab 1210−31−105...
Page 71
Siderail to Litter Assembly, Fold−to−Head...
Page 72
Siderail to Litter Assembly, Fold−to−Head FOOT END...
Page 73
Siderail to Litter Assembly, Fold−to−Head Item Part No. Part Name Qty. 1001−226−116 Pivot Bearing 1001−226−016 Pivot Bearing 1001−226−015 Pivot Sleeve 1001−226−017 Siderail Spring 1001−326−027 Right Spindle 1001−326−031 Lock Spindle Weldment, Rt. 1001−326−028 Left Spindle 1001−326−033 Lock Spindle Weldment, Lt. 1001−226−020 Siderail Spring Spacer 0025−172−000 Rivet...
Page 74
1211−127−000 Optional Dual Siderail Latch Assembly FOOT END Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0003−359−000 Hex Hd. Cap Screw 1001−226−045 Latch Spacer 0007−070−000 Truss Hd. Mach. Screw 1001−226−161 Dual Latch Cable Ass’y 0016−118−000 Nylock Nut 1001−226−142 Latch Pin 1001−226−147 Dual Latch Pivot 0038−222−000 Extension Spring...
Page 75
1001−151−000 Head End Push Handles HEAD END Item Part No. Part Name Qty. 0016−035−000 Hex Nut 0004−182−000 Soc. But. Hd. Cap Screw 0004−198−000 Soc. But. Hd. Cap Screw 0926−400−142 Bumper 1001−151−013 Spacer Post 1001−151−023 Bolt−On Push Handle Socket, Lt. 1001−151−024 Bolt−On Push Handle Socket, Rt.
Page 76
1211−351−010 Push Handle Assembly Item Part No. Part Name Qty. 1010−354−024 Stop Link 1211−151−018 Sleeve Assembly 0026−118−000 Roll Pin...
Page 77
0390−025−000 Standard, Removable I.V. Pole Assembly Item Part No. Part Name Qty. 0024−023−000 Plastic Knob 0390−003−053 Double I.V. Ass’y 0393−003−043 Tube Assembly 0004−496−000 Soc. Hd. Cap Screw...
Page 78
1001−117−000 Optional Tethered I.V. Assembly Item Part No. Part Name Qty. 0004−107−000 Soc. Hd. Cap Screw 0011−062−000 Washer 0016−003−000 Fiberlock Nut 0025−179−000 Closed End Rivet 0034−022−000 Cord Clamp 0052−015−000 Spacer 1001−001−056 Round Hook Protector 1001−001−057 Hook Protector, Left 1001−001−058 Hook Protector, Right 1001−059−012 I.V.
Page 79
1211−117−010 Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 0052−017−000 Spacer 1211−117−020 Cable Assembly 0926−400−062 Stop Sleeve 1010−059−016 I.V. Hook 1211−117−011 Extension Rod 1211−117−012 Base Tube Weldment 0004−495−000 Low Hd. Soc. Hd. Cap Screw 1211−117−016 Knob 0014−020−000 Nylon Washer 0004−232−000 Button Hd.
Page 80
Optional 2−Stage I.V. Pole Mounting Assembly Assembly part numbers 1001−080−000 (Foot End, Left) 1001−083−000 (Head End, Right) FOOT END, LEFT HEAD END, RIGHT Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page I.V. Pole Assembly (page I.V.
Page 81
Optional 2−Stage I.V. Pole Mounting Assembly Assembly part numbers 1001−081−000 (Head End, Left) 1001−082−000 (Foot End, Right) FOOT END, RIGHT HEAD END, LEFT Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page I.V. Pole Assembly (page I.V.
Page 82
1211−210−010 Optional 2−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 0008−031−000 Soc. Hd. Cap Screw 0052−017−000 Washer 0926−400−162 Spacer 1211−210−029 2nd Stage Assembly 1001−359−013 Dampener 1001−159−028 Base Tube 1010−059−016 I.V. Hook (page I.V. Pole Latch 1001−359−112 Pivot...
Page 83
1211−210−026 I.V. Pole Latch Assembly Item Part No. Part Name Qty. 0028−167−000 Retaining Ring 0031−004−000 Steel Ball 0038−392−000 Crest−to−Crest Spring 1211−091−034 Release Label 1211−110−018 I.V. Latch Seal 1211−110−020 Washer 1211−110−021 I.V. Latch Locking Pin 1211−110−022 I.V. Latch Guide 1211−110−024 I.V. Latch O.D. Housing 1211−110−035 Washer 1211−110−036...
Page 84
Optional 3−Stage I.V. Pole Mounting Assembly Assembly part numbers 1001−061−000 (Head End, Left) 1001−062−000 (Foot End, Right) HEAD END, LEFT FOOT END, RIGHT Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page I.V. Pole Assembly (page I.V.
Page 85
1211−211−010 Optional 3−Stage I.V. Pole Assembly Item Part No. Part Name Qty. 0007−004−000 Truss Hd. Machine Screw 0026−076−000 Roll Pin 0052−017−000 Spacer 1211−210−031 2nd Stage Assembly 0926−400−162 Spacer (page 3rd Stage Assembly 1001−161−023 Base Tube 1010−059−016 I.V. Hook 1010−061−014 Collar (page I.V.
Page 86
3−Stage I.V. Pole 3rd Stage Assembly Assembly part number 1211−110−032 (reference only) NOTE Item F, part number 1010−061−018 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 0031−021−000 Ball 0038−303−000 Compression Spring 1010−061−013 Ball Retainer 1010−061−016...
Page 87
0926−040−100 Foot Board/Chartholder Assembly Assembly part number 0926−040−010 (reference only) Item Part No. Part Name Qty. 0946−028−011 Chart Holder 0946−029−006 Foot Board 1020−030−000 Upright Oxygen Bottle Holder Ass’y Item Part No. Part Name Qty. 1020−030−011 Upright Bottle Holder 0027−012−000 Cotter Pin 1020−030−017 Specification Label...
Page 88
1001−023−000 Optional X−Ray Cassette Mounting Ass’y Item Part No. Part Name Qty. (page X−Ray Cassette Ass’y 0016−121−000 Self−Locking Nut 0004−456−000 Button Hd. Cap Screw 1001−023−013 Tray Latch 1020−023−013 Tray Hinge, Right 1020−023−012 Tray Hinge, Left 0025−086−000 Pop Rivet...
Page 89
1001−023−010 Optional Fowler X−Ray Cassette Ass’y Item Part No. Part Name Qty. 1001−023−012 Tray 1020−023−016 Post Housing 1001−023−014 Actuating Rod 0926−023−064 Post 1010−023−037 Rod Guide 1020−023−021 Knob 1010−023−028 Tray Angle 0926−023−070 Block Assembly 0926−023−069 Washer 0014−003−000 Washer 0038−122−000 Compression Spring 1020−023−026 Spacer 1020−023−019...
Page 90
1001−055−000 Heel Stirrup and Support Assembly Assembly part number 1001−055−010 (reference only) FOOT END Item Part No. Part Name Qty. 0003−359−000 Hex Hd. Cap Screw 0011−159−000 Flat Washer 0016−118−000 Nylock Hex Nut (page Stirrup Support Ass’y, Right (page Stirrup Support Ass’y, Left (page Stirrup Assembly...
Page 91
1001−055−015 Right Stirrup Support Assembly Item Part No. Part Name Qty. 0650−002−032 Lock Screw Assembly 0966−051−019 Wedge Lock, Modified 1001−055−011 Mounting Bracket 1010−055−016 Right Support Tube Wldmt. 0004−494−000 Soc. Hd. Cap Screw 0011−410−000 Washer 1211−117−016 Knob 0026−007−000 Roll Pin 0038−171−000 Compression Spring...
Page 92
1001−055−016 Left Stirrup Support Assembly Item Part No. Part Name Qty. 0650−002−032 Lock Screw Assembly 0966−051−019 Wedge Lock, Modified 1001−055−011 Mounting Bracket 1010−055−026 Left Support Tube Ass’y 0004−494−000 Soc. Hd. Cap Screw 0011−410−000 Washer 1211−117−016 Knob 0026−007−000 Roll Pin 0038−171−000 Compression Spring...
Page 93
1010−055−029 Heel Stirrup Assembly Item Part No. Part Name Qty. 0390−020−013 Stirrup 0390−020−009 Stirrup Holder Assembly 1010−055−030 Extension Tube Assembly 0024−011−000 Knob 0026−043−000 Roll Pin 0022−008−000 Drive Screw...
Page 94
0926−039−000 Optional Defibrillator Tray Assembly Assembly part number 0926−039−010 (reference only) Umbrella Nut/Crosstube Detail Strap Securing Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0946−039−004 Tray 0946−039−003 Support Tube 0926−039−016 Crosstube 0926−001−082 Label 0025−055−000 Rivet 1010−050−021 Long Strap 0926−039−009...
Page 95
1010−050−100 Foot Extension/Defibrillator Tray Ass’y Assembly part number 1010−050−210 (reference only) Label Detail Label Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 0008−049−000 Soc. Hd. Shoulder Bolt 1010−050−050 Knob 0014−020−000 Nylon Washer 1010−050−057 “Max. Weight” Label 0014−021−000 Nylon Washer 1010−050−205 Cushion Assembly...
Page 96
1001−070−000 C−Spine Cassette Holder Assembly Item Part No. Part Name Qty. 1010−070−025 I.V. Adaptor 1010−070−018 Specification Label 0011−447−000 Flat Washer 0004−054−000 But. Hd. Cap Screw (page Support Pole Assembly (page Storage Bracket Ass’y 0016−118−000 Nylock Nut 0003−356−000 Hex Hd. Cap Screw 1001−070−011 Attachment Bracket 0003−355−000...
Page 97
1010−070−010 C−Spine Support Pole Assembly View A−A Item Part No. Part Name Qty. 1010−070−033 Support Tube Cap 0026−006−000 Roll Pin 1010−070−034 Support Arm Weldment 1010−070−042 Cassette Holder Weldment 1010−070−050 Adjustment Tube Weldment 1010−070−030 Base Tube Weldment 1010−070−045 Knob 0025−055−000 Pop Rivet 1010−070−044 Pivot Pin 0026−005−000...
Page 98
1010−070−019 C−Spine Storage Bracket Assembly 6.5” (Ref.) 2” (Ref.) Item Part No. Part Name Qty. 1010−070−020 Storage Bracket Weldment 1010−070−045 Knob 1010−070−023 Storage Label...
Page 99
1040−010−090 Optional O@ Bottle Retainer Assembly Base Hood Item Part No. Part Name Qty. 1040−010−091 Bottle Retainer 1040−010−092 Scrulok Fastener...
Page 100
Mattresses and Siderail Pads Mattress, 2” Thick x 26” Wide, Standard ......part # 1059−226−140 Mattress, 3”...
Page 102
If requested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall...
Page 103
Stryker will perform all service during regular business hours (9−5) * Replacement parts and labor for products under PM contract will be discounted. ** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, or damage re- sulting from abuse.
Page 104
European Representative Stryker EMEA RA/QA Director Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 6300 S. Sprinkle Road, Kalamazoo, MI 49001−9799 (800) 327−0770 www.strykermedical.com DH 6/04 1002−209−002 REV A...