Stryker 1079 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. 1079
  6. Maintenance manual

Stryker 1079 Maintenance Manual

Hide thumbs Also See for 1079:
Table of Contents

Advertisement

Quick Links

Download this manual
Eye Surgery
Stretcher
Model 1079
Maintenance Manual
For parts or technical assistance call:
USA: 1-800-327-0770 (option 2)
2009/12
1079-009-002 REV B
www.stryker.com

Advertisement

Table of Contents
loading

Related Manuals for Stryker 1079

Summary of Contents for Stryker 1079

  • Page 1 Eye Surgery Stretcher Model 1079 Maintenance Manual For parts or technical assistance call: USA: 1-800-327-0770 (option 2) 2009/12 1079-009-002 REV B www.stryker.com...

  • Page 3: Table Of Contents

    Drive Link Assembly - 0853-006-135 ............www.stryker.com 1079-009-002 REV B...
  • Page 4 Temporal Wrist Rest - 1068-251-000 ............1079-009-002 REV B...
  • Page 5 International Warranty Clause............www.stryker.com 1079-009-002 REV B...

  • Page 6: Symbols And Definitions

    NOTE This provides special information to make maintenance easier or important instructions clearer. Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 7: Introduction

    Introduction This manual is designed to assist you with the operation of Stryker Model 1079 Eye Surgery Stretcher. Carefully read this manual thoroughly before using the equipment or beginning maintenance on it. To ensure safe operation of this equipment, it is recommended that methods and procedures be established for educating and training staff on the safe operation of this stretcher.

  • Page 8: Contact Information

    Stryker Medical 3800 E. Centre Avenue Portage, MI 49002 Please have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical Support. Include the serial number in all written communication. SERIAL NUMBER LOCATION Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 9: Summary Of Safety Precautions

    The hood may not be used for stepping. NOTE • Clean hood storage area regularly. • The bottom of the brake pads should be cleaned regularly to prevent wax or floor remnant buildup. Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 10: Cleaning

    Some cleaning products are corrosive in nature and may cause damage to the product if used improperly. If the products suggested above are used to clean Stryker patient care equipment, measures must be taken to insure the stretcher is wiped with a damp cloth soaked in clean water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretcher will leave a corrosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.

  • Page 11: Mattress Cleaning

    Quaternary Cleaners: identified by ingredients containing the phrase “…yl ammonium chloride” Quat/Isopropyl Cleaners: identified by a quaternary ingredient above plus isopropyl alcohol Phenolic Cleaners: identified by ingredients containing the suffix “-phenol” Chlorine Bleach: known generically as “Sodium Hypochlorite” Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 12 Rinse surfaces which have been exposed to the solution with clear water before returning mattress to service. Note: Failure to follow the above directions when using these types of cleaners may void this product’s warranty. Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 13: Preventative Maintenance

    Preventative Maintenance Preventative maintenance should be performed at a minimum of annually. A preventative maintenance program should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.

  • Page 14: Lubrication Points

    Preventative Maintenance LUBRICATION POINTS Crank Screw Assembly (1069-042-110) Apply Syntech grease (3000-200-719) through the slot in the crank screw assembly (as shown). Wipe off excess grease. Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 15: Quick Reference Replacement Parts List

    The parts and accessories listed on this page are all currently available for purchase. Some of the parts identified on the assembly drawing parts in this manual may not be individually available for purchase. Please call Stryker Customer Service USA: 1-800-327-0770 (Option 2), for availability and pricing.

  • Page 16: Service Information

    While applying pressure to the caster bolt, use a 9/16” combination wrench to remove the Nylock hex nut on top of the caster assembly. Remove the caster assembly. Reverse steps 1-5 to install the new caster assembly. Verify proper operation before returning the unit to service. Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 17: Brake Rod Removal

    When reinstalling the brake rod assembly to the base frame, do not exceed 15 ft-lb or damage could occur to the bolts. Verify proper operation before returning the unit to service. Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 18 When reinstalling the brake rod assembly to the base frame, do not exceed 15 ft-lb of torque or damage may occur to the bolts. 11. Verify proper operation before returning the unit to service. Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 19: Release Pedal Rod Removal, Foot End

    Remove the foot end pedal release rods (C). Reverse steps 1-6 to reinstall the pedal rods. Verify proper operation before returning the unit to service. Figure 5 Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 20: Release Pedal Adjustment

    12. Pull the brake ring down and out away from the stretcher base frame. 13. Reverse steps 1-12 to reinstall the brake ring. 14. Verify proper operation before returning the unit to service. Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 21: Fifth Wheel Assembly Removal

    With the assistance of another person, lift the litter straight up to remove it from the jack shafts and set it aside. Reverse steps 1-6 to reinstall the litter. Verify proper operation before returning the unit to service. Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 22: Hydraulic Jack Removal, Foot End

    When reinstalling the pump pedal link and the jack assembly, do not exceed the recommended torque or damage may occur to the bolts. 13. Verify proper operation before returning the unit to service. Figure 9 Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 23: Hydraulic Jack Removal, Head End

    When reinstalling the jack assembly, do not exceed 16 ft-lb of torque or damage may occur to the bolts. 12. Verify proper operation before returning the unit to service. Figure 10 Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 24: Removal Of Excess Air From The Hydraulic System

    3-7 seconds faster than the head end. It is recommended that the foot end drops faster to avoid patient disorientation. Check descent rate by applying evenly distributed weight to the stretcher. Verify proper operation before returning the unit to service. Figure 11 Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 25: Siderail Latch Adjustment

    Hook the extension spring to the eye bolt. Allow the arm board to lower on its own. Repeat steps 1-7 until the desired counterbalance is achieved. Verify proper operation before returning the unit to service. Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 26: Pneumatic Fowler Adjustment

    If they do not, repeat step 4. Verify proper operation before returning the unit to service. Figure 12 Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 27: Pneumatic Fowler Release Handle Adjustment

    Tighten the two screws on the handle linkage bar and reattach the spring. Check the adjustment of the pneumatic cylinders (see the “Pneumatic Fowler Adjustment” procedure on page 26). Verify proper operation before returning the unit to service. Figure 13 Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 28: Pneumatic Cylinder Replacement

    Reverse steps 1-7 to install the new cylinder. Check the adjustment of the pneumatic cylinders (see the “Pneumatic Fowler Adjustment” procedure on page 26). 10. Verify proper operation before returning the unit to service. Figure 14 Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 29 Notes Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 30: Standard Brake Assembly

    Standard Brake Assembly 0853-003-134 Rev D (Reference Only) Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 31 0753-003-079 Caster Tube Brake Pin Guide 0753-003-121 Brake Cushion 0853-003-230 Bearing Pivot Support 0853-101-001 Base Weldment 0853-003-135 Brake Rod Assembly (page 32) 0853-005-087 Return Spring Hook 3001-200-052 Ground Chain 0753-003-131 Spacer Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 32: Brake Rod Assembly

    Brake Rod Nyliner 0853-003-004 Brake Rod Support 0853-003-010 Drive Link Assembly (page 39) 0853-003-137 Brake Rod 0853-006-135 Drive Link Assembly (page 40) 1210-201-335 Label - Red Brake 1210-201-336 Label - Green Steer Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 33: Side Control Brake Assembly

    Side Control Brake Assembly 0853-003-138 Rev D (Reference Only) Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 34 Side Control Brake Assembly Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 35 Brake Cushion 0753-003-230 Bearing Pivot Support 0853-101-001 Base Weldment 0853-003-210 Side Control Brake Assy (page 37) 0853-003-136 Brake Rod/Side Control Assembly (page 36) 0853-005-087 Return Spring Hook 3001-200-052 Ground Chain 0753-003-131 Spacer Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 36: Brake Rod/Side Control Assembly

    Side Control Link 0853-003-004 Brake Support Rod 0853-003-010 Drive Link Assembly (page 39) 0853-003-137 Brake Rod 0853-006-135 Drive Link Assembly (page 40) 1210-201-335 Label - Brake Red 1210-201-336 Label - Steer Green Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 37: Side Control Brake Assembly

    0753-003-112 Side Control Link 0753-003-117 Rod End Link 0853-003-214 Side Control Shaft Support 0853-003-319 Side Control Brake Rod 1210-201-335 Label - Brake Red 1210-201-336 Label - Steer Green 0026-138-000 Groove Pin Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 38: Standard Brake Assembly, Colored Components

    Side Control Brake Assembly, Colored Components Rev B 0853-003-660 Rev B (Reference Only) Part Number Part Description Quantity 0753-003-006 Brake Ring Weldment (Black) 0753-010-020 8” Caster Assembly (Black) 0853-005-154 Butterfly “V” Pedal (Black) Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 39: Drive Link Assembly - 0853-003-010

    Drive Link Assembly - 0853-003-010 Rev C Item Part No. Part Name Qty. 0753-003-098 Flat Head Semi-Tubular Rivet 0753-203-102 Brake Cam 0853-003-011 Brake Rod Drive Link 0853-003-061 Brake Cam Drive Link Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 40: Drive Link Assembly - 0853-006-135

    Drive Link Assembly - 0853-006-135 Rev B Item Part No. Part Name Qty. 0753-003-098 Flat Head Semi-Tubular Rivet 0853-003-011 Brake Rod Drive Link 0853-006-022 Fifth Wheel Cam Drive Link 0853-006-047 Fifth Wheel Cam Drive Link Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 41: 8" Caster Assembly - 0753-010-020

    8” Caster Assembly - 0753-010-020 Rev A Item Part No. Part Name Qty. 0715-002-025 Wheel 0003-099-000 Hex Head Cap Screw 0753-010-021 Caster Horn with Bearing Assembly 0016-060-000 Centerlock Hex Jam Nut Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 42: Retractable Fifth Wheel Base Assembly - 0853-006-110

    Retractable Fifth Wheel Base Assembly - 0853-006-110 Rev B Item Part No. Part Name Qty. 0023-288-000 Hex Washer Head Screw 0023-305-000 Hex Washer Head Screw 0753-006-148 Cam Bearing 0853-006-130 Fifth Wheel Assembly (page 44) Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 43 Notes Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 44: Fifth Wheel Assembly

    Fifth Wheel Assembly 0853-006-130 Rev C (Reference Only) Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 45 Drive Shaft 0753-006-277 Roller 0853-006-126 Fifth Wheel Bracket 0853-006-131 Fifth Wheel Weldment 0853-006-227 Return Spring Hook 0853-010-045 Hood Standoff 1210-001-147 Fifth Wheel 0023-160-000 Hex Washer Head Screw 0853-006-011 Link Stop Plate Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 46: Constant Descent Jacks

    Constant Descent Jacks 0853-002-025 Rev B (Reference Only) Item Part No. Part Name Qty. 0023-288-000 Hex Washer Head Screw 0753-002-001 Constant Descent Jack Assembly 0853-010-007 Reservoir Clamp Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 47: Trend Limiter - 1069-020-010

    Trend Limiter - 1069-020-010 Rev A Item Part No. Part Name Qty. 1040-010-027 Trend Limiter Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 48 Notes Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 49: Dual Sided Hydraulics Assembly

    Dual Sided Hydraulics Assembly 0853-005-525 Rev B (Reference Only) Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 50 Dual Sided Hydraulics Assembly Detail A See Detail A Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 51 Release Rod, Foot End 0853-004-251 Lowering Pedal Assembly (page 53) 0853-005-035 Pump Connecting Tube Weldment 0853-005-074 Pivot Pin 0853-005-075 Pump Pedal Link 0853-005-285 Pump Pedal Assembly, Head End (page 54) 0853-010-215 Release Rod Bracket Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 52: Standard Hydraulics Assembly, Colored Components

    Part Number Part Description Quantity 0753-004-134 Left Release Pedal, Foot End (Black) 0753-004-135 Right Release Pedal, Foot End (Black) 0753-201-126 Pump Pedal (Black) 0853-003-099 Butterfly “V” Pedal (Black) 1061-201-127 Short Uni-Pedal (Black) Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 53: Lowering Pedal Assembly

    Lowering Pedal Assembly 0853-004-251 Rev B (Reference Only) Item Part No. Part Name Qty. 0025-133-000 Rivet 0753-004-029 Release Pedal Standoff 0853-004-004 Release Pedal Weldment 0853-004-320 Release Pedal Support 1069-004-320 Release Pedal Support Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 54: Pump Pedal Assembly, Head End - 0853-005-285

    Pump Pedal Assembly, Head End - 0853-005-285 Rev A Item Part No. Part Name Qty. 0026-343-000 Groove Pin 0715-001-140 Vinyl Tube 0853-005-180 Pump Pedal Weldment, Head End Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 55: Three Sided Hydraulics Assembly

    Three Sided Hydraulics Assembly 0853-005-510 Rev B (Reference Only) Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 56 Assemble release rod hooks between the head end and foot end release rod adjustment clevis joint and release pedal brackets. See the top view on the next page. Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 57 Pump Pedal Bushing 0853-004-223 Release Pedal Assembly, Foot End (page 58) 0853-005-011 Pump Pedal Spring Return Bracket 0853-005-074 Pivot Pin 0853-005-075 Pump Pedal Link 0853-005-273 Pump Pedal Assembly, Foot End (page 59) Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 58: Release Pedal Assembly, Foot End

    Rue Ring Cotter 0027-022-000 Rue Ring Cotter 0052-822-000 Span-in Nyliner 0753-004-028 Release Pedal Return Spring, FE 0753-004-422 Release Pedal Mounting Bracket, FE 1 0853-004-138 Release Rod, Foot 0853-004-139 Release Rod, Head Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 59: Pump Pedal Assembly, Foot End - 0853-005-273

    Pump Pedal Assembly, Foot End - 0853-005-273 Rev A Item Part No. Part Name Qty. 0026-343-000 Groove Pin 0715-001-140 Clear Vinyl Tube 0853-005-171 Pump Pedal Weldment, Foot End Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 60: Base Labels - Standard Brakes, Side Control Hydraulics

    Base Labels - Standard Brakes, Side Control Hydraulics 0853-010-062 Rev B (Reference Only) Specification Label Orient as shown Foot End Head End Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 61 Item Part No. Part Name Qty. 0853-010-040 Base Hood 1040-010-134 Bellows 0946-201-060 Label - Stryker Logo See Table Below Label - Brake/Steer, Foot End See Table Below Label - Lift/Lower, Left See Table Below Label - Lift/Lower, Right Item Purple...

  • Page 62: Base Labels - Standard Brakes, Foot End/Side Control Hydraulics

    Base Labels - Standard Brakes, Foot End/Side Control Hydraulics 0853-010-060 Rev B (Reference Only) Specification Label Orient as shown Foot End Head End Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 63 Bellows 0853-010-052 Label - Pump Pedal, Foot 0753-010-053 Label - Release Pedal, Foot 0946-201-060 Label - Stryker Logo See Table Below Label - Brake/Steer, Foot End See Table Below Label - Lift/Lower, Left See Table Below Label - Lift/Lower, Right...

  • Page 64: Base Labels - Foot End/Side Brakes, Side Control Hydraulics

    Base Labels - Foot End/Side Brakes, Side Control Hydraulics 0853-010-063 Rev B (Reference Only) Specification Label Orient as shown Foot End Head End Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 65 Part No. Part Name Qty. 0853-001-041 Base Hood 1040-010-134 Bellows 0946-201-060 Label - Stryker Logo 0853-010-018 Label - Brake/Steer, Right 0853-010-019 Label - Brake/Steer, Left See Table Below Label - Brake/Steer, Foot End See Table Below Label - Lift/Lower, Left...

  • Page 66: Base Labels - Foot End/Side Brakes, Foot End/Side Control Hydraulics

    Base Labels - Foot End/Side Brakes, Foot End/Side Control Hydraulics 0853-010-061 Rev B (Reference Only) Specification Label Orient as shown Foot End Head End Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 67 Bellows 0853-010-052 Label - Pump Pedal, Foot End 0753-010-053 Label - Release Pedal, Foot End 0946-201-060 Label - Stryker Logo 0853-010-019 Label - Brake/Steer Label, Left 0853-010-018 Label - Brake/Steer Label, Right See Table Below Label - Brake/Steer, Foot End...

  • Page 68: Litter Assembly

    Litter Assembly 1069-030-110 Rev A (Reference Only) Head End Foot End Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 69 Litter Assembly Foot End Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 70 Cover, Foot, Left 1010-001-017 Roller Plate 1010-032-066 Rectangular Hole Plug 1010-032-210 Jack Support Assembly, Foot End (page 71) 1068-020-038 Bumper Channel 1069-030-130 Jack Support Assembly, Head End (page 72) 1069-030-150 Litter Frame Weldment Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 71: Jack Support Assembly, Foot End

    Hex Head Cap Screw 0016-036-000 Nylock Hex Nut 0023-288-000 Hex Washer Head Screw 0044-029-000 Double Sided Foam Tape .5 ft 0753-010-029 Support Tube 0919-030-028 Rack Glide 0938-001-401 Collar Assembly 1010-032-064 Carrier Tube 1010-032-108 Roller Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 72: Jack Support Assembly, Head End

    1069-030-130 Rev B (Reference Only) Item Part No. Part Name Qty. 0011-360-000 Washer 0023-288-000 Hex Washer Head Screw 0753-010-029 Support Tube 1069-030-120 Jack Mount Weldment, Left 1069-030-125 Jack Mount Weldment, Right Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 73: Dual Articulating Pneumatic Fowler - 1069-132-210

    Dual Articulating Pneumatic Fowler - 1069-132-210 Rev D Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 74 Dual Articulating Pneumatic Fowler - 1069-132-210 Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 75 Dual Articulating Pneumatic Fowler - 1069-132-210 Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 76 ® Pile 2.5 ft 0011-063-000 Washer 0011-179-000 Washer 0011-180-000 Washer 0014-087-000 Washer 3001-300-099 Fowler Modified Bushing 0038-436-000 Extension Spring 1069-060-091 Label - Fowler Release, Left 1069-060-092 Label - Fowler Release, Right Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 77 Notes Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 78: Dual Articulating Crank Fowler - 1069-142-250

    Dual Articulating Crank Fowler - 1069-142-250 Rev B Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 79 0011-179-000 Washer 0016-036-000 Nylock Hex Nut 0025-050-000 Rivet 1069-031-012 Barrel Nut 1069-031-013 Hole Plug 1069-032-055 Fowler Skin 1069-132-250 Fowler Weldment 1069-133-020 Headpiece Assembly (page 80) 7900-001-102 Velcro ® Pile 2.5 ft Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 80: Dual Articulating Head Piece - 1069-133-020

    Dual Articulating Head Piece - 1069-133-020 Rev D Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 81 Dual Articulating Head Piece - 1069-133-020 Return To Table of Contents www.stryker.com 1079-009-002 REV B...
  • Page 82 Dual Articulating Head Piece - 1069-133-020 Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 83 Head Shaft 1069-133-084 Neck Shaft 1069-133-085 Neck Spacer 1069-133-088 Head Spacer 1069-133-100 Link Weldment 1069-133-110 Handle Weldment, Right 1069-133-115 Handle Weldment, Left 7900-001-102 Velcro ® Pile .71 Ft. 1069-133-121 Handle Torsion Spring Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 84: Crank Fowler Assembly

    0003-078-000 Hex Head Cap Screw 0008-027-000 Shoulder Bolt 0016-028-000 Nylock Nut 0946-001-064 Label - Fowler 1010-034-015 Mounting Bracket Assembly 1066-033-068 Sleeve 1069-042-110 Crank Screw Assembly (page 85) 0014-019-000 Washer 1040-010-027 Spacer Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 85: Crank Screw Assembly - 1069-042-110

    ® 0004-007-000 Socket Head Cap Screw 0016-035-000 Nylon Hex Nut 0003-027-000 Hex Head Cap Screw 1069-042-021 Drive Tube Assembly 1550-001-014 Magnet 1069-142-024 Fowler Crank Spacer 0011-013-000 Washer 1069-042-016 Fowler Screw Support Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 86: Stationary Foot Section Assembly

    Part Name Qty. 0003-073-000 Hex Head Cap Screw 0014-003-000 Washer 0016-028-000 Hex Nut 0025-101-000 Rivet 1010-032-060 Pivot Bolt 1068-044-050 Stationary Foot Weldment 1069-019-001 Foot Section Skin 7900-001-102 Velcro ® Pile 1 ft Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 87 Notes Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 88: Gatch Assembly

    Gatch Assembly 1068-040-110 Rev A (Reference Only) Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 89 1010-034-015 Mounting Bracket Assembly 1068-041-010 Foot and Thigh Subassembly (page 90) 1068-046-010 Gatch Crank Screw Assembly (page 91) 1510-034-190 Slider Pad 1510-034-194 Calf Stand Rest 7900-001-102 Velcro Pile .33 ft ® Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 90: Foot And Thigh Section Subassembly

    Rivet 0027-007-000 Cotter Pin 1010-032-060 Pivot Bolt 1010-034-023 Calf Stand Bar 1010-034-025 Thigh Section Weldment 1066-034-059 Thigh Section Skin 1068-040-044 Calf Section Skin 1068-040-050 Calf Section Weldment 1510-034-088 Calf Stand Bracket Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 91: Gatch Crank Screw Assembly - 1068-046-010

    Conelock Nut 0946-034-025 Gatch Screw 1510-034-084 Screw Cover Assembly 1068-046-012 Gatch Drive Tube Assembly 0026-010-000 Slotted Spring Pin 7900-001-102 Velcro Pile Tape 2” ® 1550-001-014 Magnet 0004-007-000 Socket Head Cap Screw Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 92: Siderail To Litter Assembly, Two-Position Siderails

    0721-026-074 Lock Handle 1010-026-069 Lock Support 1010-026-080 Lock Housing Assembly, Left 1010-026-081 Lock Housing Assembly, Right 1010-026-103 Spring Retainer 1068-020-015 Siderail Assembly, Right (page 93) 1068-020-017 Siderail Assembly, Left (page 93) Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 93: Two Position Siderail Assembly, Right - 1068-020-015

    Part No. Part Name Qty. 1010-026-015 Top Rail 1010-026-083 Upright 1010-026-084 Bent Upright 1010-026-082 Sleeve Bearing 0025-106-000 Semi-Tubular Rivet 1010-026-010 Round Hole Plug 1010-026-085 Latch Upright Assembly 1010-026-012 Bent Spindle Rest Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 94: Siderail To Litter Assembly, Optional Three Position Siderail

    Pivot Screw 0004-515-000 Button Head Cap Screw 0021-104-000 Set Screw 0016-028-000 Nylock Hex Nut 0038-220-000 Compression Spring 0004-135-000 Button Head Cap Screw 0011-002-000 Flat Washer 0037-074-000 Hole Plug 1066-126-019 Spring Plate Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 95: Three Position Siderail Assembly, Right - 1066-026-015

    Item Part No. Part Name Qty. 1010-026-015 Top Rail 1010-026-083 Upright 1010-026-084 Bent Upright 1010-026-082 Sleeve Bearing 0025-106-000 Semi-Tubular Rivet 1010-026-010 Hole Plug 1066-026-027 Latch Upright Assembly 1010-026-012 Bent Spindle Rest Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 96: Optional Accessories

    Air Delivery / Drape Support 1068-168-000 Removable I.V. Pole 0390-025-010 Two Stage Permanent I.V. Pole, Foot End 1010-080-000 Three Stage Permanent I.V. Pole, Foot End 1020-062-000 1069-026-070 1069-026-080 Mattresses 1069-026-060 1069-026-090 1010-052-000 Siderail Pads Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 97: Pre-Op/Post-Op Head Pads - 1069-160-010

    Head Piece, Right (page 98) 1069-060-035 Head Piece, Left (page 98) 1069-060-060 Receptacle Weldment, Right 1069-060-070 Receptacle Weldment, Left 1069-060-220 Latch Bracket, Right (page 100) 1069-060-225 Latch Bracket, Left (page 100) Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 98: Head Piece Assembly, Right - 1069-060-025

    Head Piece Assembly, Right - 1069-060-025 Head Piece Assembly, Left - 1069-060-035 Rev -/- Applies to Crank Fowler Assembly Option Only Return To Table of Contents 1079-009-002 REV B www.stryker.com...
  • Page 99 Label - Head Extension 1069-060-140 Slider Pin 1069-060-142 Spring Spacer 1069-060-145 Cam Pin 1069-060-012 Latch Knob 1069-260-091 Label - Latch Release 7900-001-102 Velcro ® Pile (4.5”) 0026-179-000 Spiral Pin 0008-020-000 Shoulder Bolt Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 100: Latch Bracket Assembly, Right - 1069-060-220

    Rev A / A Applies to Crank Fowler Assembly Option Only Right Left Item Part No. Part Name Qty. 0004-325-000 Button Head Cap Screw 1069-060-221 Bracket, Right 1069-060-226 Bracket, Left 1069-060-222 Latch Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 101: Temporal Wrist Rest - 1068-251-000

    Low Profile Socket Head Cap Screw 1 1068-051-050 Temporal Tube Weldment 1068-250-041 Wrist Rest Wedge Bolt 1068-250-042 Wrist Rest Lock Wedge 1068-250-050 Base Tube Weldment 1068-252-055 Support Bar Wrist Rest Casting 1068-290-051 Label - Wrist Rest Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 102: Superior Wrist Rest - 1068-250-000

    1068-050-055 Support Bar Wrist Rest Weldment 1068-250-041 Wrist Rest Wedge Bolt 1068-250-042 Wrist Rest Lock Wedge 1068-250-050 Base Tube Weldment 1068-252-055 Support Bar Wrist Rest Casting 1068-290-050 Label - Wrist Rest Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 103: Caddy - 0753-022-000

    Socket Head Screw 0016-118-000 Hex Lock Nut 0023-288-000 Hex Washer Head Screw 0753-022-001 Clutch Assembly 0753-022-005 Mount Plate Weldment 1050-001-036 Boot 1050-091-044 Euro Arm Assembly 1050-001-057 Label - Storage (not shown) Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 104: Defibrillator Tray - 0785-045-200

    Dual Lock 0029-010-000 Dual Lock 0785-045-201 Label - Defib Tray 0785-045-402 Label - Push/Pull 0785-045-403 Label - Weight Capacity 0785-045-204 Tray Support 0785-045-207 Tray 0785-045-208 Bayonet 0785-045-210 Frame Weldment 1010-050-021 Long Strap Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 105: Defibrillator Tray/Foot Extender/Chart Service - 0785-045-400

    Label - Foot Extender/Defib Tray 0785-045-405 Cushion 0785-045-410 Base Mounting Weldment 0785-045-420 Frame Pivot Weldment 0785-045-430 Tray 0785-045-450 Knob 1010-050-021 Long Strap 1010-050-242 Lock Pin 1010-050-250 Lock Adjuster 1010-050-248 Lower Lock Pin 0721-031-065 Hole Plug Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 106: Foot Board/Chart Holder - 0785-045-500

    Part Name Qty. 0785-045-402 Label - Push/Pull 0785-045-501 Label - Foot Board 0785-045-511 Chartholder 0785-045-512 Foot Board Back 0785-045-513 Foot Board Front 0785-045-514 Small Standoff 0785-045-515 Large Standoff 0946-029-010 Support Weldment Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 107: Upright Oxygen Bottle Holder - 1010-030-000

    Upright Oxygen Bottle Holder - 1010-030-000 Rev - Item Part No. Part Name Qty. 1010-030-011 Upright Bottle Holder 0027-012-000 Cotter Pin 0741-030-024 Nylon Stand-Off 1010-030-017 Label - Specification Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 108: Oxygen Bottle Retaining Ring - 1040-010-090

    Oxygen Bottle Retaining Ring - 1040-010-090 1040-010-095 Rev A (Reference Only) Item Part No. Part Name Qty. 1010-010-091 Oxygen Bottle Retainer Hoop 1040-091-092 Scrulok Assembly Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 109: Serving/Instrument Tray - 0785-045-700

    Qty. 0785-045-701 Serving Tray Label 0785-045-704 Flat Head Torx Screw 0785-045-705 Serving Tray Top 0785-045-706 Serving Tray Pinion 0785-045-710 Serving Tray Slider 0785-045-715 Serving Tray Cover 0785-045-403 Label - Weight Capacity Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 110: Serving Tray Holder / Foot Board - 0785-045-800

    Rev D Item Part No. Part Name Qty. 0025-079-000 Rivet 0025-133-000 Rivet 0785-045-402 Label - Push/Pull 0785-045-801 Label - Serving Tray Holder 0785-045-805 Foot Board 0785-045-810 Foot Board Support Weldment 0946-001-155 Bumper Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 111: Integrated Transfer/Armboards - 1060-058-000

    0016-028-000 Nylock Nut 0038-218-000 Extension Spring 1010-024-025 Spring Retainer 1010-024-030 Arm Board Support Assy (page 112) 2 1060-001-114 Arm Board Assembly, Left (page 113) 1060-001-115 Arm Board Assembly, Right (page 114) Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 112: Arm Board Support Assembly - 1010-024-030

    Arm Board Support Assembly - 1010-024-030 Rev C Item Part No. Part Name Qty. 1010-024-015 Support Block 1010-024-016 Support Arm 1010-024-014 Label - Warning 0038-263-000 Spring 0008-017-000 Shoulder Bolt 1010-026-046 Ball Knob Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 113: Transfer Board, Left - 1060-001-114

    Connecting Link Assembly 1010-032-094 Pivot Arm Assembly, Left 0028-093-000 Retaining Ring 0003-050-000 Hex Head Cap Screw 0011-224-000 Nylon Flat Washer 0014-021-000 Nylon Flat Washer 0004-156-000 Socket Head Cap Screw 0721-024-046 Label 0014-002-000 Washer Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 114: Transfer Board, Right - 1060-001-115

    Connecting Link Assembly 1010-032-096 Pivot Arm Assembly, Right 0028-093-000 Retaining Ring 0003-050-000 Hex Head Cap Screw 0011-224-000 Nylon Flat Washer 0014-021-000 Nylon Flat Washer 0004-156-000 Socket Head Cap Screw 0721-024-046 Label 0014-002-000 Washer Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 115: Accessory Rail - 1068-266-000

    1068-266-010 Rev B (Reference Only) Item Part No. Part Name Qty. 0003-047-000 Hex Head Cap Screw 0004-495-000 Socket Head Cap Screw 0016-028-000 Fiberlock Hex Nut 1068-066-042 Option Bar/Rail 1068-266-050 Option Bar Weldment Mounting Bracket Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 116: Arm Board With Clamp - 1068-056-000

    Disc 1060-001-154 Split Ring 1060-001-155 Ball Post 1060-001-159 Leg Support Bar 1068-056-013 Arm Board Cover 1068-056-015 Arm Board 1068-056-016 Restraint Strap Assembly 8812-670-000 7900-001-102 Velcro ® Pile 4” 1068-054-010 Direct Clamp Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 117: Arm Board Without Clamp - 1068-055-000

    Foam Pad 1060-001-152 Disc 1060-001-154 Split Ring 1060-001-155 Ball Post 1060-001-159 Leg Support Bar 1068-056-013 Arm Board Cover 1068-056-015 Arm Board 1068-056-016 Restraint Strap Assembly 8812-670-000 7900-001-102 Velcro ® Pile 4” Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 118: Air Delivery / Drape Support - 1068-168-000

    Oxygen Tube Cap 1068-268-042 Oxygen Hose Receptacle 1068-068-041 Oxygen Supply Line 1068-090-068 Label - Specification 1066-085-013 Goose Neck 1068-168-015 Oxygen Latch 0026-172-000 Roll Pin 0014-007-000 Flat Washer 0011-063-000 Washer 0030-067-000 Grommet 0052-324-000 Spacer Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 119: Removable I.v. Pole Assembly - 0390-025-010

    Removable I.V. Pole Assembly - 0390-025-010 0390-025-000 Rev J (Reference Only) Item Part No. Part Name Qty. 0390-003-056 Knob 0390-003-053 Double I.V. Assembly 0393-003-043 Tube Assembly 0004-496-000 Socket Head Cap Screw Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 120: Two Stage Permanent I.v. Pole, Foot End - 1010-080-000

    Hex Head Cap Screw 0004-199-000 Button Head Cap Screw 0016-036-000 Fiberlock Hex Nut 0016-028-000 Fiberlock Hex Nut 1001-059-042 Plug 1001-259-111 I.V. Pivot Weldment 1211-210-010 Two Stage I.V. Pole Assy (page 121) Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 121: Two Stage I.v. Pole Assembly - 1211-210-010

    Part Name Qty. 0008-031-000 Socket Head Screw 0052-017-000 Spacer 0926-400-162 Spacer 1211-210-029 Second Stage Assembly 1001-259-013 Dampener 1001-159-028 Base Tube 1010-059-016 I.V. Hook 1211-210-026 I.V. Pole Latch (page 122) 1001-359-112 Pivot Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 122: Pole Latch Assembly - 1211-210-026

    1211-110-018 I.V. Latch Seal 1211-110-020 Washer 1211-110-021 I.V. Latch Locking Pin 1211-110-022 I.V. Latch Guide 1211-110-024 I.V. Latch, O.D. Housing 1211-110-035 Washer 1211-110-036 Self Tapping Screw 1211-210-023 I.V. Latch I.D. Housing Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 123: Three Stage Permanent I.v. Pole, Foot End - 1020-062-000

    1020-061-011 Rev B (Reference Only) Item Part No. Part Name Qty. 1211-211-010 Three Stage I.V. Pole Assembly (page 124) 1001-259-111 I.V. Pivot Weldment 0004-091-000 Button Head Cap Screw 0016-020-000 Centerlock Nut 1001-159-042 Plug Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 124: Three Stage I.v. Pole Assembly - 1211-211-010

    1001-161-023 Base Tube 1001-259-013 Dampener 1001-359-014 Dampener 1001-359-112 Pivot 1010-059-016 I.V. Hook 1010-061-014 Collar 1211-110-016 Threaded Adaptor 1211-210-026 I.V. Pole Latch 1211-210-031 Second Stage Assembly 1211-210-032 Third Stage Assembly (page 125) Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 125: Three Stage I.v. Pole Third Stage Assembly

    1211-110-032 Rev A (Reference Only) Item Part No. Part Name Qty. 0031-021-000 Ball 0038-303-000 Compression Spring 1010-061-013 Ball Retainer 1010-061-016 Retaining Shaft 1010-061-017 Thumb Knob 1010-061-018 Hand Guard 1211-110-117 1211-110-033 Third Extension Rod Return To Table of Contents www.stryker.com 1079-009-002 REV B...

  • Page 126: Mattresses And Siderail Pads

    Siderail Pad Set ............part # 1010-052-000 Return To Table of Contents 1079-009-002 REV B www.stryker.com...

  • Page 127: Warranty

    Stryker’s obligation under this warranty is expressly limited to supplying replacement parts and labor for, or replacing, at its option, any product which is, in the sole discretion of Stryker, found to be defective. If requested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to the factory. Any improper use or any alteration or repair by others in such manner as in Stryker’s judgment affects the product materially and...

  • Page 128: Service Contract Programs

    * Replacement parts and labor for products under PM contract will be discounted. ** Does not include any disposable items, I.V. poles (except for Stryker HD permanent poles), mattresses, batteries, or damage resulting from abuse. Stryker Medical also offers personalized service contracts.
  • Page 130 UNITED STATES Stryker Medical 3800 E. Centre Ave., Portage, Michigan USA 49002 European Representative Stryker France ZAC Satolas Green Pusignan Av. De Satolas Green 69881 MEYZIEU Cedex France 2009/12 1079-009-002 REV B www.stryker.com...

Table of Contents