Table of Contents
Advertisement
Overview
Digital TalkAnytime LED Descriptions
T1 Front Panel LEDs
The TA2410 and TA24-48 both use a common main circuit board or motherboard. Consequently the LED
indicators are the same for both.
Active LEDs. The TA2410 front panel has two sets of identical LEDs. In the TA2410 as shipped (that is,
without an expansion card), the left-hand set of LEDs is functional whereas the right-hand set is not.
When the TA2410 has been upgraded with an TA24-48 kit, the right-hand set of LEDs will also become
active.
Click-to-Talk Media Server
T1 LED Descriptions. The descriptions below apply to the digital T1 TalkAnytime units. The TA2410 has
two sets of LEDs, one for the single board shipped inside the TA2410 unit, and a second set for an
expansion board that can be purchased (TA24-48). As viewed from the front of the TA2410, it is the left
group that is active and that presents feedback about the operation of the TA-2410 unit. If a TA24-48
expansion card is added to the TA2410, the second group of LEDs, beginning with the second "Power"
LED, become operational with respect to the second T1 TalkAnytime circuit card.
Figure 1-2: TA2410 LEDs
12
TalkAnytime User Guide
Advertisement
Table of Contents
