Operation and Maintenance
Setting a Password (Windows GUI)
After a user name has been designated and a password has been set, that password is required to gain
access to any functionality of the TalkAnytime software. Only one user name and password can be
assigned to a voip unit. The user name will be required when communicating with the TalkAnytime via
the web browser GUI.
NOTE: Record your user name and password in a safe place. If the password is lost, forgotten, or
unretrievable, the user must contact MultiTech Tech Support in order to resume use of the
TalkAnytime unit.
1. The TalkAnytime configuration program must be off when invoking the Set Password command. If it
is on, the command will not work.
2. To invoke the Set Password command, go to Start | Programs | TalkAnytime____ x.xx | Set Password.
182
TalkAnytime User Guide