Antenna Specifications; Rf Interface; Default Power Up Settings; Led Indicators - Multitech MultiConnect WF MTS2WFA User Manual

Antenna Specifications

Category
Frequency Range
Impedance
VSWR
Gain
Radiation
Polarization
Connector

RF Interface

Radio Characteristics
Frequency
Modulation
Number of Channels
Transmission Rate
RF Receive Sensitivity
RF Transmit Power

Default Power Up Settings

Baud Rate = 115200bps
Data Bits = 8 bits
Parity = None
Stop bits = 1 bit
Hardware Flow Control RTS/CTS =

LED Indicators

LED Description
TD Transmit Data. This LED is lit when the adapter is transmitting data on the serial port.
RD Receive Data. This LED is lit when the adapter is receiving data on the serial port.
CD Carrier Detect. This LED is lit when the adapter detects a valid carrier signal on the
serial port.
It is on when the serial port has a valid connection.
TR Terminal Ready. (Also called Data Terminal Ready.) This LED indicates the PC is
turned on and ready to communicate. It is lit when a data communications program
initializes the adapter. It goes off when the communications program disconnects the
COM port. When it goes off, a connected adapter will disconnect.
802.11 LNK Wi-Fi Link. This LED is lit when there is a valid link for a Wi-Fi connection.
802.11 ACT Wi-Fi Activity. This LED is on while there is Wi-Fi activity.
PWR Power. This LED Indicates the presence of DC power when lit.
Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A)
Chapter 1 – Product Description and Specifications
Description
2.4-2.5 GHz
50 ohm nominal
<2.0:1
5 dBi
Omni
Vertical
Reverse Polarity SMA Plug
2.400 to 2.484 GHz
DSSS
1 to 14
1, 2, 5.5, 11 Mbps
-82 dBm
16 dBm maximum
Disabled
7