Call Details - Multitech TalkAnytime TA2410 User Manual

Operation and Maintenance
Field Name
Log # column
Start Date,Time
column
Duration column
Type
Status column
IP Direction
Mode column
From column
To column
Special Buttons
Previous
Next
First
Last
Delete File

Call Details

Voice coder
Disconnect
Reason
DTMF Capability
Outbound Digits
Received
Outbound Digits
Sent
Server Details
Packets sent
Packets received
Packets loss
(lost)
Bytes sent
Bytes received
Logs Screen Details: Field Definitions (cont'd)
Values
1 or higher All calls are assigned an event number in chronological order, with the most
recent call having the highest event number.
dd:mm:yyyy
The starting time of the call (event). The date is presented as a day expression of one
hh:mm:ss
or two digits, a month expression of one or two digits, and a four-digit year. This is
followed by a time-of-day expression presented as a two-digit hour, a two-digit
minute, and a two-digit seconds value. (statistics, logs) field
This describes how long the call (event) lasted in hours, minutes, and seconds.
hh:mm:ss
H.323, SIP, or SPP Indicates the Call Signaling protocol used for the call (H.323, SIP, or SPP).
success or
Displays the status of the call, i.e., whether the call was completed successfully or not.
failure
incoming,
Indicates whether the call is "incoming" or "outgoing" with respect to the gateway.
outgoing
voice or FAX
Indicates whether the (event) being described was a voice call or a FAX call.
gateway name
Displays the name of the voice gateway that originates the call.
gateway name
Displays the name of the voice gateway that completes the call.
-- Displays log entry before currently selected one.
-- Displays log entry after currently selected one.
-- Displays first log entry
-- Displays last log entry.
-- Deletes selected log file.
G.723, G.729, The voice coder being used on this call.
G.711, etc.
Values are Indicates whether the call was disconnected simply because the desired
"Normal" and conversation was done or some other irregular cause occasioned
"Local" disconnection (e.g., a technical error or failure).
disconnection.
inband,
Indicates whether the DTMF dialing digits are carried "Inband" or "Out of Band." The
out of band
corresponding field values differ for the 3 different voip protocols.
For H.323, this field can display "Out of Band" or "Inband". For SIP it can display
Expressions
either "Out of Band RFC2833" or "Out of Band SIP INFO" to indicate the out-of-band
differ slightly
condition or "Inband" to indicate the in-band condition. For SPP it can display "Out of
for different
Band RFC2833" or "Inband".
Call Signaling
protocols
(H.323, SIP, or
SPP).
0-9, #, * The digits, sent by
having been received by the remote voip gateway.
0-9, #, * The digits transmitted by the
-- This field is not applicable to TalkAnytime.
integer value The number of data packets sent over the IP network in the course of this
call.
integer value The number of data packets received over the IP network in the course of
this call.
integer value
The number of voice packets from this call that were lost after being received from
the IP network.
The number of bytes of data sent over the IP network in the course of this call.
integer value
integer value The number of bytes of data received over the IP network in the course of
this call.
Description
TalkAnytime
to PBX/telco, that were acknowledged as
TalkAnytime
152
TalkAnytime User Guide
to the PBX/telco for this call.