Table of Contents
Advertisement
TalkAnytime User Guide
E1 Telephony Parameters (for TA3010)
The following parameters must be known about the PBX or telco central office equipment to which the E1
TalkAnytime unit will connect:
E1 Phone Parameters
Ask phone company or
PBX maintainer.
• Which frame format is used?
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
internal
Note that the setting used in the TalkAnytime unit will
be the opposite of the setting used by the telco/PBX.
• Which line coding is used?
• Pulse shape level?: (most commonly 0 to 40 meters)
Write down the values for these E1 parameters. You will need to enter these values in the "T1/E1/ISDN
Parameters" screen in the Configuration section of the TalkAnytime software.
SMTP Parameters (for email call log reporting)
required if log reports of
TA unit's call traffic
are to be sent by email
SMTP Parameters
Preparation Task:
Ask Mail Server
administrator to set up
email account (with
password) for the
TalkAnytime unit itself.
Be sure to give a unique
identifier to each
individual TalkAnytime
unit. .
Get the IP address of the
mail server computer, as
well.
Info needed to operate:
E1 Parameters:
Record for this
TalkAnytime unit.
Double Frame
MultiFrame w/ CRC4
MultiFrame w/ CRC4 modified
or
clocking? _________________
external
___ or
AMI
Optional
To: I.T. Department
re: email account for VOIP
voip-unit2@biggytech.com
TA3010
_____
_____
_____
___
HDB3
69
Technical Configuration
Advertisement
Table of Contents
