Multitech TalkAnytime TA2410 User Manual page 127

Click-to-talk media server voice/ip gateways
Hide thumbs Also See for TalkAnytime TA2410:
Table of Contents

Advertisement

TalkAnytime User Guide
TalkAnytime URL Configuration
End users will access the TalkAnytime by clicking on an icon on a web site. The web server must include a
URL link expression that not only directs the caller to the TalkAnytime unit but also specifies values for
several other parameters (four parameters are required; two are optional).
The general form of the URL expression is as follows:
TalkAnytime URL Command Line
http://a.b.c.d/tat.cgi?Service=string1&Protocol=n&Codec=q&SC=w&Packetization=y&Digits=z
Configuration Parameter
Involved
TalkAnytime
IP Address
Service
Protocol
Codec
Silence Compression
Packetization
Digits
allowed variant of tat.cgi?
Note:
Use of phonebook entries and URL command lines is illustrated in the
that follows.
Portion of URL in question
where a , b , c , and d are variables;
Values: 0 to 255
where string1 is a variable;
Values: any letters/numbers;
no spaces, periods, commas,
or symbols ;
40 characters max.
where n is a variable;
Values: TCP or UDP
where q is a variable;
Values: G711A, G711U, G723,
where w is a variable;
Values: ON, OFF
where y is a variable;
Values: 30, 60, 90, & 120 (for G723);
10, 20, 30, 40, 50, 60, 70, 80,
& 90 (for G711A & G711U).
where z is a variable;
Values: Yes, No
tatfrm.cgi?
All non-italicized characters in the URL expression are fixed literal
characters that must be included verbatim. As noted above, the
expression has an allowed variant.
127
PhoneBook & URL Configuration
Comment
This value must match the
value of the Description field in
the Inbound Phonebook.
This parameter is optional. If
omitted, remove the entire
expression "SC= w" from the
URL expression.
This parameter is optional. If
omitted, remove the entire
expression
"Packetization= y" from the
URL expression.
When Digits=No, the end user
can use the TalkAnytime
keypad to dial only after
connection has been made.
When Digits=Yes, the end
user can user the TalkAnytime
keypad to dial immediately.
Used to eliminate black
background behind
TalkAnytime user screen.
TalkAnytime System Examples
tat.cgi?
section

Advertisement

Table of Contents
loading

This manual is also suitable for:

Talkanytime ta3010

Table of Contents