Wiring,
Continued
Modem Wiring
The Modem Media Card uses RJ-11 connectors to connect 4100-6014 NIC Assemblies across
parts of a network.
Use the RJ-11 connector (P2) to connect nodes that use the modem media card. Do not use
connector P1 (P1 is reserved for when the daughter card is used as a physical bridge). Leased lines
must be analog, full-duplex, private line (no dial tone), with a two-wire RJ-11 interface. Style 4
requires one circuit; Style 7 requires two circuits.
INTERFACE CARD
P3
MODEM MEDIA
CARD
4100-6014
NETWORK
firealarmresources.com
Standard TELCO Cable
P3
P3
P3
Figure 12. Modem Wiring
20
Continued on next page