Installing the Daughter Card
Installing the
The 4100 NIC daughter card, shown in Figure 9 below, inserts into the connector located in the
Daughter Card
center of the motherboard. The connector is keyed so that the daughter card fits only one way.
Before installing the card, examine the slot in the motherboard and the fingers on the daughter
card and note where the key is located.
•
•
If the 575-274 Master Motherboard is being used, the NIC daughter card is inserted into
connector J1.
If the 566-227 CPU Motherboard is used, the NIC daughter card is inserted into
connector J2.
Figure 9. Installing the Daughter Card
firealarmresources.com
15