Mounting Media Cards to the NIC
Overview
The first step of the installation process is to identify the media cards that have to be connected to
the NIC, and connect them properly.
Media Board
Refer to Figure 6 as you read the following instructions.
Mounting
Connect P1 on the wired media card, or J1 on the modem or fiber media cards, to P5 (the left port)
on the NIC.
To connect a second media card to the same NIC, connect it as described above, but use P6 (the
right port) on the NIC. Note that any two types of media cards can be connected to the same NIC.
Figure 6. Mounting the Media Card
12
firealarmresources.com