Table of Contents
Advertisement
Menu
Setting
Color Space
Select the color gamut from "Auto,"
"BT.709," or "BT.2020."
When "Auto" is selected, the color
gamut changes according to the
resolution set in "Format." When
"3840×2160" is selected, clone out (SDI
signal) is output with the "BT.2020"
setting. When "1920×1080" is selected,
it is output with the "BT.709" setting.
Port A Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT A button.
Set to "Not Skip" or "Skip" for the 12G-
SDI, 3G-SDI, Display Port, HDMI, DVI-D
input connector.
Port B Input Select
Sets the input connector that is
skipped when changing the input
signal by pressing the PORT B button.
Set to "Not Skip" or "Skip" for the 12G-
SDI, 3G-SDI, Display Port, HDMI, DVI-D
input connector.
Input Name
Set the name of the 12G-SDI, 3G-SDI,
Display Port, HDMI, DVI-D input
connector.
Endoscope
Laparoscope
Ultrasound
Recorder
Printer
PACS
C-arm
Room Camera
Surgical Camera
Microscope
Vital Device
AUX IN Setting
Input Select
Select the connector to input the AUX IN
signal from "12G-SDI," "3G-SDI," "Display
Port," "HDMI," or "DVI-D."
Power Supply
DC Output Select
Select the connector for DC output
from "Off," "5V OUT," or "12V OUT."
Power Supply Port
When the 5 V output power of the DVI-
Select
D input connector is output, select
"DVI-D."
When the 3.3 V output power of the
Display Port input connector is output,
select "Display Port." When both of
them are not output, select "Off."
Auto Input Select
Select the auto detection setting of the
input signal from "Off," or "On."
Off:
The Auto Input Select function does
not operate.
On:
Gives priority to PORT A and
switches the port automatically.
Menu
System Configuration menu
Menu
Control Lock
Control Lock
Lock Mode
30
Setting
Notes
When "Auto Input Select" is set
to "On," if a signal is input to
PORT A or the connector
assigned to PORT A or PORT B,
the PORT A signal is displayed
on the screen. When a signal is
not input to the connector
assigned to PORT A or the
signal disappears in the middle
of input, and a signal is input to
only the connector assigned to
PORT B, the PORT B signal is
displayed on the screen.
When a signal is input to the
connector assigned to PORT A
while displaying the PORT B
signal on the screen, the PORT
A signal is displayed on the
screen.
The selected port signal, which
is displayed on the screen
immediately after the monitor is
turned on, may not be
displayed correctly depending
on the input signals. It will be
displayed correctly after a
period of time.
If a signal is input to the
connector not assigned to PORT
A/B, the signal is not displayed
on the screen.
Auto Input Select cannot be
used when input signals are
assigned to both the Display
Port input connector and HDMI
input connector. Even when
Auto Input Select is set to "On,"
it is disabled due to the
limitations to this function.
If a signal is detected while
displaying the menu, the menu
will be hidden.
Setting
Set when you want to limit the
operation of the control panel. Set to
"Off" for no limit, "On" to limit.
Sets the range to limit the operation of
the control panel. This setting is
available when "Control Lock" is set to
"On."
Menu:
Limits the menu operations other
than the control lock setting.
Menu&Button:
Limits all operations other than the
control lock setting.
Advertisement
Table of Contents
