Table of Contents
Advertisement
1) HDCP (High-bandwidth Digital Content
Protection) is a copyright protection technology
using encryption technology of digital video
signals.
Notes
A signal is output from the connector only
when the monitor is turned on. When the
monitor is turned off, the signal is not output
from the connector.
The DVI-D input/output connector is not
compatible with the 4K equivalent signal. For
details, refer to "Available signal formats" on
page 34.
HDMI input connector
Input connector for HDMI signals.
Use the Premium High Speed cable that is
shorter than 3 m (meters) with the cable-type
logo. (Cables manufactured by Sony are
recommended.)
DP1 (Display Port 1) input connector
Input connector for Display Port signals.
Display Port is an interface developed by VESA
that supports transfer of both video and audio
digital signals on a single cable.
Use the DisplayPort standard version 1.2-certified
cable.
This monitor does not support Display Port audio
signals.
DP2 (Display Port 2) input/output
connector
input connector
Input connector for Display Port signals.
output connector
Output connector for Display Port signals. The
signals are output when signals input to the
DP2 input connector are displayed on the
screen. HDCP-protected signals are not output.
12V 2.5A (DC output) connector
Outputs 12 volts for connected external
equipment.
5V 2.0A (DC output) connector
Outputs 5 volts for connected external
equipment.
SDI input/output connector (BNC type)
input connector
Input connector for serial digital component
signals (4K/HD/SD).
output connector
Active through output connector for serial
digital component signals (4K/HD/SD).
Recommended cables
12G-SDI: Coaxial cable L-5.5CUHD manufactured
by Canare Electric Co., Ltd. or an equivalent cable
3G-SDI: Coaxial cable L-5CFB manufactured by
Canare Electric Co., Ltd. or an equivalent cable
HD-SDI: Coaxial cable L-5CFB manufactured by
Canare Electric Co., Ltd. or an equivalent cable
SD-SDI: Coaxial cable L-5CFB manufactured by
Canare Electric Co., Ltd. or an equivalent cable
An SDI signal is output from the output
connector only when the monitor is turned on.
When the monitor is turned off, the signal is
not output from the output connector.
Be sure to connect equipment or cables
specified by Instructions for Use of this monitor
to the SDI output connectors. If you connect
unspecified equipment or cables, the monitor
may affect the operation of the connected
equipment.
(Equipotential) terminal
Connects the equipotential plug.
AC input connector
Connects the supplied AC power cord.
(DC input) connector
Connect the DC connector of the optional AC
adaptor.
Warning
For the DC power supply, make sure to use the
optional AC adaptor, AC-300MD.
If another power supply is used, there is a risk of
fire or electric shock.
19
Advertisement
Table of Contents
