Table of Contents
Advertisement
Precaution
On Safety
Operate the unit only with a power source as
specified in the "Specifications" section.
The nameplate indicating operating voltage,
etc. is located on the rear panel of monitor and
the AC adaptor.
Should any solid object or liquid fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it any
further.
Unplug the unit from the wall outlet if it is not
to be used for several days or more.
To disconnect the AC power cord, pull it out by
grasping the plug. Never pull the cord itself.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
On Installation
Prevent internal heat build-up allowing
adequate air circulation.
Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation holes.
Do not install the unit near heat sources such as
radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration or shock.
Do not place the monitor near equipment
which generates magnetism, such as a
transformer or high voltage power lines.
Safety precautions for using this unit
Viewing images may result in eye strain,
fatigue, nausea, or other symptoms of
discomfort. It is best to take frequent breaks
when viewing content. Because the length and
frequency of breaks will differ from person to
person, be sure to trust your instincts when
deciding to take breaks from viewing. When
feelings of discomfort occur, stop viewing the
images until the symptoms subside, and
consult with a specialist physician if necessary.
Avoid using this unit while walking or
exercising, or in areas that shake violently, as
doing so can increase the chances of feelings
of discomfort.
When connecting the unit to medical
equipment, refer to "Precautions when
connecting this unit to medical equipment".
Precautions when connecting this unit to
medical equipment
Before using this unit for medical purposes, be
sure to confirm that use of this unit will not
cause symptoms that may interfere with
medical practice, such as eye strain, fatigue,
and nausea, etc.
Refrain from using this unit if symptoms occur
that interfere with medical practice, or if such
symptoms are likely to occur.
Depending on the conditions of the video input
to the unit (e.g., the steadiness, movement
speed, and focus position of the video, the
distance from subject, the area of the image
the user is viewing) and the general health of
the user, the user may experience visual
fatigue, tiredness, and other discomfort.
Before starting a medical procedure, make sure
that the image from the connected device is
displayed correctly on this unit.
To prolong the life of the unit
Turn off the power to preserve the performance
when not in use for a prolonged time.
Cautions for RESPONSIBLE ORGANIZATION
when connecting this equipment to IT-
NETWORK
– connection of the PEMS to an IT-NETWORK that
includes other equipment could result in
previously unidentified RISKS to PATIENTS,
OPERATORS or third parties;
– the RESPONSIBLE ORGANIZATION should
identify, analyze, evaluate and control these
RISKS;
– subsequent changes to the IT-NETWORK could
introduce new RISKS and require additional
analysis; and
– changes to the IT-NETWORK include:
changes in the IT-NETWORK configuration;
connection of additional items to the IT-
NETWORK;
disconnecting items from the IT-NETWORK;
12
Advertisement
Table of Contents
