Tools, Tools Parameters; Ddns Group; Modem Group; Tools, Firmware Upgrade Parameters - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

Tools, Tools Parameters

DDNS Group

DDNS Force Update:
Click Update to update the DDNS server with your current dynamically assigned IP address.
DDNS Status:
Click Refresh to display the DDNS Status after a forced update.

Modem Group

Reset Modem:
Click Reset to reset the integrated cellular modem.

Tools, Firmware Upgrade Parameters

Firmware Upgrade Group

Use the Firmware Upgrade group to upgrade the firmware for the router. You can find and download all Multi-
Tech firmware upgrades from the Multi-Tech Website.
Before you upgrade your firmware, note the following:
Save your present configuration in case you want to use it again.
The new firmware is written into flash memory.
A firmware upgrade takes at least 4 minutes. Do not turn off power during this time because the firmware is
being downloaded.
Do not upgrade the firmware remotely through the Cellular wireless connection.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
73

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents