Multitech MultiModem MTCBA-G2-EN2 User Manual page 72

Chapter 3 – Using the Web Management Software
Port: Sets the server port. The default is None
Connection Terminate By:
Escape Sequence: Set the escape sequence characters at which the connection terminates.
Inactivity timeout:
Others: The other terminating sequences are: DTR-toggle or Always-On.
DTR-toggle: If DTR status goes low, the connection terminates.
Always-On: Sets the terminate sequence as Always-on.
Submit Button: Click Submit to save these settings.
72
Sets the connection's terminate sequence as follows:
Set the inactivity timeout at which the connection terminates.
Multi-Tech Systems, Inc. MultiModem rCell User Guide