Remote Configuration Group; Nmea Configuration Group; Communication Examples - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

Remote Configuration Group

The Remote Configuration group allows the device to connect to a remote server using the IP and port
information for uploading GPS data.
TCP/UDP Client
Enable or disable the TCP/UDP Client and defines the protocol of the client. The defaults are
Disable and TCP.
Remote Host
Displays the IP address and port number of the Remote Host.
Password
If the Remote Host requests a password, the password entered here is sent to the server in
response.

NMEA Configuration Group

The NMEA Configuration allows you to configure the time interval, any additional prefix or ID information and forward NMEA
sentences.
Interval
The Interval is defined in seconds. The default is 10 seconds. The range is 1 to 255 seconds.
Add ID Prefix
The ID Prefix is 0 to 10 character prefix added to the ID.
Add ID
The ID is a unique remote asset identification string. You can specify up to 20 characters for
the ID string. The & and $ are invalid characters. The ID must follow the standard NMEA
sentence structure. The Universal IP AT Commands Reference Guide, which you can download
from the Multi-Tech website, describes sentence structure.
NMEA
GGA, GSA, GSV, GLL, RMC, and VTG are the NMEA sentences. You can turn each sentence On
Sentences
or Off. The default is On.

Communication Examples

Communication is shown from the remote side.
TCP Server example
read: "PASSWORD\r\n"
write: "serverpasswd\r\n"
read: "OK\r\n"
read: "&&rcell$GPGGA,192913.002,4505.9845,N,09311.7705,W,1,10,1.0,249.0,M,-29.0,M,,0000*6F\r\n"
read: "&&rcell$GPGSA,A,3,13,07,03,05,19,06,23,08,16,10,,,1.8,1.0,1.6*3F\r\n"
read: "&&rcell$GPGSV,3,1,12,07,59,308,33,13,59,202,32,03,55,083,33,19,50,136,33*76\r\n"
read: "&&rcell$GPGSV,3,2,12,06,43,065,26,23,35,177,26,08,24,296,27,16,19,059,21*79\r\n"
read: "&&rcell$GPGSV,3,3,12,10,14,286,29,05,07,321,28,24,06,087,23,21,01,029,*76\r\n"
read: "&&rcell$GPGLL,4505.9845,N,09311.7705,W,192913.002,A,A*43\r\n"
read: "&&rcell$GPRMC,192913.002,A,4505.9845,N,09311.7705,W,000.0,117.3,220710,,,A*76\r\n"
read: "&&rcell$GPVTG,117.3,T,,M,000.0,N,000.0,K,A*09\r\n"
read: "&&rcell$GPGGA,192915.002,4505.9842,N,09311.7699,W,1,10,1.0,248.9,M,-29.0,M,,0000*62\r\n"
read: "&&rcell$GPGSA,A,3,13,07,03,05,19,06,23,08,16,10,,,1.8,1.0,1.6*3F\r\n"
read: "&&rcell$GPGSV,3,1,12,07,59,308,33,13,59,202,33,03,55,083,33,19,51,136,33*76\r\n"
read: "&&rcell$GPGSV,3,2,12,06,43,065,25,23,35,177,26,08,24,296,27,16,19,059,21*7A\r\n"
read: "&&rcell$GPGSV,3,3,12,10,14,286,28,05,07,321,28,24,06,087,23,21,01,029,*77\r\n"
read: "&&rcell$GPGLL,4505.9842,N,09311.7699,W,192915.002,A,A*46\r\n"
read: "&&rcell$GPRMC,192915.002,A,4505.9842,N,09311.7699,W,000.0,117.3,220710,,,A*73\r\n"
read: "&&rcell$GPVTG,117.3,T,,M,000.0,N,000.0,K,A*09\r\n"
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
39

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents