Ppp, Modem Commands Parameters; Modem At Commands Configuration Group - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

PPP, Modem Commands Parameters

You can configure modem commands to allow an external application to query modem information.
The application can use the URL
assigned to the integrated cellular modem after the PPP connection is established.
You can also display the results of up to ten AT commands.

Modem AT Commands Configuration Group

These commands are sent when a PPP connection to the network is initiated.
Useful HSDPA AT commands include:
Command
Description
AT+CGSN
Product Serial Number
AT+CGMR
Software Version
AT+CNUM
Wireless Subscriber Number
AT+COPS?
Network Information (Operator)
AT+CREG?
Network Registration
AT+CSQ
Signal Quality
Retrieving Modem Information without using a browser:
To obtain the integrated cellular modem information without using a browser:
Make a TCP connection to port 80 (same as the Web Admin port) and send data as:
1.
GET /atinfor.html HTTP/1.1
Press Enter twice.
2.
Refer to the AT Command Reference Guides for other commands.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
H TTP://xxx.xxx.xxx.xxx/modeminfor.html
U
Chapter 3 – Using the Web Management Software
to determine the IP address that is currently
U
51

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents