Ppp, Ppp Configuration Parameters; Nat Configuration Group - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

Chapter 3 – Using the Web Management Software

PPP, PPP Configuration Parameters

NAT Configuration Group

NAT:
Enable or disable NAT (Network Address Translation). The default is Enable.
Note:
For routing to take effect, enable then save the configuration.
Enabling NAT
Your LAN can use one set of IP addresses for internal traffic and a second set of addresses for external traffic. The
router with NAT does the simple IP routing between the LAN interface and the WAN interface. NAT hides the LAN
address behind a single IP address on the wireless side.
Your internal addresses are shielded from the public Internet.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
41

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents