Serial-Port, Serial Port Settings Parameters; Serial-Port Configuration Group - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

Chapter 3 – Using the Web Management Software

Serial-Port, Serial Port Settings Parameters

Serial-Port Configuration Group

Serial-Port Configuration lets you configure the serial terminal connected to the RS-232 connector DE9 on the
back of the unit.
Baud Rate:
Sets the baud-rate at which the serial terminal is communicating. The default is 115200.
Flow Control:
Sets the flow control for the serial port. Options are None or RTS-CTS. The default is None.
Data Bits:
Sets the data bits for the serial port. Data bit selection is 7 or 8. The default is 8.
Stop Bits:
Sets the stop bits for the serial port. Options are 1 or 2. The default is 1.
Parity:
Sets the parity for the serial port. Options are None, Even, or Odd. The default is None.
Buffer Length:
Sets the length up to which the data from the serial device is buffered before IP transmission. The
default length is 32-characters.
Timeout:
Sets the timeout value for the serial terminal of how long it waits before IP transmission. The default is
1-second.
Submit Button:
Click Submit to save these settings.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
69

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents