Ip Setup, Http Configuration Parameters; Http Configuration Group; Authentication Group; Submitting And Saving Your Changes - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

Chapter 3 – Using the Web Management Software

IP Setup, HTTP Configuration Parameters

HTTP Configuration Group

HTTP Port
Enter the port number on which the HTTP server listens for requests. The default is 80.
HTTP Time-0ut
Set the HTTP session in seconds. The default is 120 seconds.

Authentication Group

Use the Authentication group to change the user name and password. The Username and password combination
provide access the Web Management software, as well as telnet access to the router and integrated cellular
modem.
Username
Enter the name of a user who is allowed access to the Web Management software. Default is
admin.
Password
Enter the Password associated with the user who is allowed access to the Web Management
software. Default is admin. It can be up to100 characters. Use a safe password. Your first name
spelled backwards is not a sufficiently safe password; a password similar to xfT35$4 is better.

Submitting and Saving Your Changes

To save these settings, click Submit.
To ensure your changes go into effect, click Save and Restart.
32
Multi-Tech Systems, Inc. MultiModem rCell User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents