Ip Setup, Sntp Configuration Parameters; General Configuration Group; Time Zone Configuration Group - Multitech MultiModem MTCBA-G2-EN2 User Manual

Intelligent wireless router
Hide thumbs Also See for MultiModem MTCBA-G2-EN2:
Table of Contents

Advertisement

IP Setup, SNTP Configuration Parameters

General Configuration Group

SNTP Client
Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set
the local time. The default is Disable.
Server
Enter the SNTP server name or IP address that the SNTP Client contacts to update the time. No
default.
Polling Time
Enter the time, in minutes, after which the SNTP client requests the server to update the time.
Default is 300 minutes.

Time Zone Configuration Group

Time Zone:
Enter the time zone. Default is UTC (Universal Coordinated Time, Universal Time). See the following
website for Time Zone information:
http://wwp.greenwichmeantime.com/info/current-time.htm
Time Zone Offset:
Enter +/- hh:mm. Default is +00:00. Offset is the amount of time varying from the standard
time of a Time Zone.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
Chapter 3 – Using the Web Management Software
35

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiModem MTCBA-G2-EN2 and is the answer not in the manual?

This manual is also suitable for:

Multimodem rcellMtcba-xx-en2Mtcba-xx-en2-gp

Table of Contents