Zmotion ZMIO300 Series Hardware Manual page 50

→*1 data value meaning:
Data value
The output status of output module and DA module recovers initial value after
1
The output status of output module and DA module keeps the present status after
2
→*2 data value meaning:
Data value
0
5678
➢ After entering the upgrade model, if not to upgrade, please power on again, it will
exit automatically.
➢ The upgrade model is used for firmware update of coupler module (ECAT
communication module), don't use under non-functional upgrade.
 Data dictionary 5000h is built definitely, but following data dictionary are built or
not according to connected expand submodule.
 Each time connect one expansion submodule, relative status value data dictionary
will be built. If it is AD module or DA module, it will make relative control data
dictionary.
Control Data Dictionary
The index of control data dictionary is (5000 + expansion address) h. If expansion
address of the connected AD module or DA module is 1, then built control data
dictionary's index is 5001h. If the expansion address is 6, the built control data
dictionary's index will be 5006h. If it is not connected, there also no build.
➢ This data dictionary only be built when AD module or DA module connects.
Status value data dictionary
 Status value data dictionary's index will be built depends on module type. If it is
ZMIO300 Series Hardware Manual Version 1.8
Meaning
communication breaks
communication breaks
Meaning
Normal model
Upgrade model
50