Installation Size - Zmotion ZMIO300 Series Hardware Manual

Input current (typical)
Input impedance
Voltage when is ON
Voltage when is OFF
Internal Power
Its Power
Isolation
Input motion display

3.2.1.3 Installation Size

Installation Step:
➢ Please use 35mm standard DIN guide rail.
➢ Open guide rail buckle of input module, then embed input module in the DIN guide
rail.
➢ Press fit guide rail buckle of input module, then fix input module in the DIN guide
rail.
ZMIO300 Series Hardware Manual Version 1.8
connects with 24V power supply+) or NPN (COM1
connects with 24V power supply+, COM2 connects with
24V power-)
NPN type (-4.8mA); NPN type (+4.8mA)
4.7KΩ
PNP type > 7.2V or NPN type < 14.5V
PNP type < 6.8V or NPN type < 14.7V
0.3W
1.9W
Optocoupler isolation
When input is ON, the input indicator lights is on
23