Table of Contents
Advertisement
ZMIO300 Series Hardware Manual Version 1.8
malfunction, false operation.
The specification and install methods of equipment external
wiring should obey local electric wiring regulations.
Firstly, determine the interface type to be connected, then link
with cable. If connect with wrong interface or false wiring, it
will cause module or external equipment malfunction.
Make sure the cable of press-in terminal is good contact. If the
cable is not pressed tightly, it will cause short circuit, fire or
false actions.
Don't tie up control wire, communication cable and main
power circuit or power cord together, the trace distance should
exceed 100mm, or the noise will cause false actions.
5
Advertisement
Table of Contents
