Status Word Contents - ABB FENA-01 User Manual

Bit Name
10 REMOTE_
CMD
11 EXT_CTRL_
LOC
12... Reserved or freely programmable control bits
15 (Not supported with ACS355)

Status word contents

The table below shows the contents of the Status word for the ABB
Drives communication profile. The upper case boldface text refers
to the states shown in the state machine on page 95.
Bit Name
0 RDY_ON
1 RDY_RUN
2 RDY_REF
3 TRIPPED
4 OFF_2_STA
5 OFF_3_STA
6 SWC_ON_
INHIB
Modbus/TCP – Communication profiles
Value
1 Fieldbus control enabled.
0 Control word and reference not getting
through to the drive, except for CW bits
OFF1, OFF2 and OFF3.
1 Select External Control Location EXT2.
Effective if control location parameterized
to be selected from fieldbus.
0 Select External Control Location EXT1.
Effective if control location parameterized
to be selected from fieldbus.
Value
1 READY TO SWITCH ON
0 NOT READY TO SWITCH ON
1 READY TO OPERATE
0 OFF1 ACTIVE
1 OPERATION ENABLED
0 OPERATION INHIBITED
1 FAULT
0 No fault
1 OFF2 inactive
0 OFF2 ACTIVE
1 OFF3 inactive
0 OFF3 ACTIVE
1 SWITCH-ON INHIBITED
0 –
STATE/Description
STATE/Description
93