Cybersecurity Disclaimer - ABB FENA-01 User Manual

30 Introduction to the manual
NONE protocol selection
•
NONE – Start-up
of the drive with the adapter module and gives examples of
configuring the NONE protocol.
•
NONE - Diagnostics
LEDs on the adapter module.

Cybersecurity disclaimer

This product is designed to be connected to and to communicate
information and data via a network interface. It is Customer's sole
responsibility to provide and continuously ensure a secure
connection between the product and Customer network or any
other network (as the case may be). Customer shall establish and
maintain any appropriate measures (such as but not limited to the
installation of firewalls, application of authentication measures,
encryption of data, installation of anti-virus programs, etc.) to
protect the product, the network, its system and the interface
against any kind of security breaches, unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
ABB and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
Note: The web pages are meant only for configuring the device
during commissioning. For security reasons, it is recommended to
disable the web pages after commissioning.
presents the steps to take during the start-up
explains how to trace faults with the status