Table of Contents
Advertisement
2.
Press [Edit Image].
3.
Press [Overlay].
4.
Press [Format Overlay (Scan + Scan)], and then press [OK].
5.
Press the [Start] key.
Master making starts.
6.
Place the second original, and then press the [Start] key.
Format Overlay (Store + Store)
This function can be used only when the optional HDD board is installed.
1.
Press the [Master Making] mode select key.
2.
Press [Edit Image].
3.
Press [Overlay].
4.
Press [Format Overlay (Store + Store)].
5.
Press [Stored File (Page 1)].
6.
Press the stored file name you want to select as an original format, and then press [OK].
7.
Press [Stored File].
8.
Press the stored file name you want to select as an overlay original, and then press [OK].
9.
Press [OK] twice.
10.
Press the [Start] key.
Overlay
107
Advertisement
Table of Contents
