Table of Contents
Advertisement
Directional Magnification (%)
Prints can be reduced or enlarged at different reproduction ratios, horizontally and vertically.
a: Horizontal ratio
b: Vertical ratio
1.
Place the originals.
2.
Press [Reduce / Enlarge].
3.
Press [Specified Ratio].
4.
Press [Direct. Mag.%].
To enter the ratio using the number keys
1. Press [Horizontal].
2. Enter the ratio using the number keys, and then press [#].
3. Press [Vertical].
4. Enter the ratio using the number keys, and then press [#].
5. Press [OK].
To specify a ratio using [ ] and [ ]
1. Press [With [+][-]].
2. Press [Horizontal].
3. Adjust the ratio using [ ] or [ ].
Pressing [ ] or [ ] changes the ratio in increments of 1%. Pressing and holding down [ ]
or [ ] changes it in increments of 10%.
If you have incorrectly entered the ratio, readjust it using [ ] or [ ].
CP2P01EE
Directional Magnification (%)
81
Advertisement
Table of Contents
