Fx Types - Akai Z4 User Manual

82
Chapter 10—Using FX

FX Types

See page 79 for selecting FX types, and page 81 for editing FX.
Chorus>Mono
Chorus>Stereo
Chorus>Xover
Chorus+Delay
Compressor/Limiter
Delay>Mono
Delay>Multi Tap
Delay>Panning
Delay>Ping Pong
Delay>Stereo
Delay>Xover
Digital EQ
Distortion
Enhancer
Expander
Flanger>Mono
Flanger>Pan
Flanger>Stereo
Flanger>Xover
Flanger+Delay
Noise Gate
Pan>Auto Pan
Pan>Trigger Pan
Phaser>Mono
Phaser>Pan
Phaser>Stereo
Phaser>Xover
Z4/Z8 User Guide—Version 1.0
FX Type
This is a standard chorus effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
This is a stereo chorus effect that adds width and spread to
the stereo image.
This is a variation of the STEREO CHORUS. The feedback from
each channel is fed to the other channel.
This effect consists of a chorus effect and a delay effect con-
nected in series.
This monaural effect suppresses signals with a certain level or
higher and limits the dynamic range. It also provides a noise
gate that cuts noise during silence.
This is a standard delay effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
This delay effect creates a special effect by adjusting the
interval between feedback sounds and the level change
curve of the feedback sounds.
This delay effect pans the delay sound left, center, then right
(LCR), or right, center, then left (RCL).
This delay effect pans the effect sound left and right.
This delay effect can be set for the left and right channels
individually.
This is a variation of the STEREO DELAY. The feedback from
each channel is fed to the other channel.
This is a monaural, three-band parametric equalizer.
This monaural distortion effect distorts input signals. An equal-
izer is connected to the effect in series.
This monaural effect enhances sounds by adding new over-
tones.
This monaural effect limits signals at a certain level (thresh-
old) or lower and expands the dynamic range, providing an
effect opposite to the compressor effect.
This is a standard flanger effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
This effect adds an auto panning effect to the mono flanger.
This is a stereo flanger effect that adds width and spread.
This is a variation of the STEREO FLANGER. The feedback from
each channel is fed to the other channel.
This monaural effect consists of a flanger effect and a delay
effect connected in series.
This monaural effect mutes signals at a certain level (thresh-
old) or lower. This is useful for cutting noise during silent parts
of a performance.
This auto pan effect automatically rotates the stereo image
of the sound left and right. It also adds depth of rotation.
This auto pan effect becomes enabled when the output
level of one of the AUX Sends A–D exceeds a certain level.
You can also start the auto pan effect manually.
This is a standard phaser effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
This effect adds an auto panning effect to the phaser effect
sound.
This is a phaser effect that adds width and spread to the ste-
reo image.
This is a variation of the STEREO PHASER. The feedback from
each channel is fed to the other channel.
Description