Resampling With Q-Fx - Akai Z4 User Manual

38
Chapter 6—Editing Samples
TIME STRETCH
The Time Stretch function enables you to change the speed of Samples without affecting
their pitch.
Amount:
The "Preset" and "Adjust" parameters are the same as those for the Pitch Shift function.
STEREO TO MONO
The Stereo To Mono function enables you to convert stereo Samples to two mono Sam-
ples.
Name the L channel and R channel Sample names by using the "New Left Name" and
"New Right Sample" parameters.
MONO TO STEREO
The Mono To Stereo function enables you to convert two mono Samples to create a new
stereo Sample.
Select an L-channel Sample for the "L source" parameter and an R-channel Sample for
the "R source" parameter, then enter a name for the new stereo Sample in the "New ST
name" parameter.

Resampling with Q-FX

You can resample a Sample with Q-FX, creating a new Sample in the process.
On the TRIM page, press "Q-FX."
1
The Quick FX Resampling window appears.
The Quick FX Resampling function offers two modes: COMMAND and FX.
2 Select the "Mode" parameter, then use the JOG dial to set the mode.
Z4/Z8 User Guide—Version 1.0
This sets the amount of speed to be changed as a percentage.