Akai Z4 User Manual page 74

66
Chapter 7—Using Programs
Reference:
play. For example, when used as a Filter Envelope, if the Reference value is the same as
the L3 value (center example), the cutoff frequency during the sustain phase is applied as
originally set. If the Reference value is higher than that of L3 (left example), the cutoff
frequency will be lower than that specified on the FILTER page. This also applies to pitch
Envelopes (i.e., if Reference is the same as L3, Samples will play at their original pitch).
R1–R4:
L1–L4:
You will need to select FILT ENV > CUTOFF in the Program Modulation window to
control the Filters via the FILTER envelope. See "Configuring Program Modulation" on
page 58 for more information.
This is the Filter Aux page.
The other parameters are the same as those on the Filter Envelope page.
You will need to configure Program Modulation for controls via the AUX envelope. See
"Configuring Program Modulation" on page 58 for more information.
Z4/Z8 User Guide—Version 1.0
The settings are indicated by the horizontal dotted line in the Envelope dis-
Reference: 75
These are the time settings for the four points.
These are the level settings for the four points.
R1
Reference: 50
L1
L2 L3
R2 R3
Reference: 25
L4
R4