Single Component Connection - Shimano SC-EN600 Dealer's Manual

Connection and communication with devices

Single component connection

If the left switch of a bicycle without a cycle computer is the SW-EN600-L, the SW-EN600-L can be
connected to the part of the cycle computer indicated in the figure to connect with the SHIMANO
STEPS components of the entire bicycle.
Bracket installation type cycle computer
Refer to the figure when connecting.
With free port
SM-PCE02
Connect to drive unit or satellite system ON/OFF switch
Without free port
Connect to switch unit
SM-PCE02
EW-JC304 (EW-SD300 type)
Single component connection
Disconnect the wires of each component from the E-TUBE port, and connect to the PC via the PC linkage device.
Connect to switch unit
Connect to switch unit
Connect to drive unit or satellite
system ON/OFF switch
47