Maintenance
Gear shifting adjustment with the electronic gear shifting unit [Adjust]
1.
Setting menu ⇒ [Adjust] ⇒ check the current setting value
* Switch unit integrated type: With [GEAR] displayed, press and hold <A> on the cycle computer until the
display switches to [ADJUST].
Value is [0]: Proceed to "
Value is not [0]: Proceed to "
Clamp band type
cycle computer example
(SC-EN600)
Adjusting when the setting value is [0]
Adjust the setting value one step at a time with [0] as the reference value.
1.
<▲><▼> (adjust the setting value by one step)
Clamp band type
cycle computer example
(SC-EN600)
Adjusting when the setting value is [0]
Adjusting when the setting value is not [0]
Switch unit integrated type
cycle computer example
(SC-EN500)
Switch unit integrated type
cycle computer example
(SC-EN500)
."
53
."