Installation/removal
Installing the cycle computer
2.
Adjust the installation angle, and secure the cycle computer to the handlebar.
30°
15°
Front
Bracket installation type cycle computer
For model: SC-EN610
The bracket used to secure the cycle computer to the handlebar, and the cycle computer itself are separate parts.
Installation layout
A bracket installation type cycle computer can be installed to the handlebar with layouts like those indicated in
the figures.
When placing the cycle computer on
the stem
Front
The procedure from here describes an example of placing the cycle computer on a stem such as that indicated in
the figure on the left.
0.8 N·m
Clamp screw
When placing the cycle computer on the
front of the handlebar
20
Front